TW Tool Kit
Close
    
    
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree1Likes

Thread: TW Tool Kit

  1. #1
    Member bruisr's Avatar
    Join Date
    Jul 2010
    Posts
    69
    Seems that the previous owner of my TW (recent acquisition by me) wanted to keep the tool kit as a souvenir. What consists in the tool kit that comes with the bike?
    1993 TW/1200 origional miles/FMF/Clarke Tank/Pro Bend Hand Guards/Pro Taper chain/Larger Foot Pegs/Pro Taper grips/PIAA 35w/Cyclorack/LED stock turn signal conversion/Storage tubes/Kenda 270 5.10 front tire/Glock 45 Handle Bar mount(for the desert runs)!

  2. #2
    Senior Member Wheelie Nelson's Avatar
    Join Date
    Jul 2010
    Location
    Austin, TX
    Posts
    204
    the toolkit is cheap. i have made my own with some quality components. i don't know why someone would have kept it.



    the three end wrenches are 8/10, 10/12, 14/17. the closed wrench is 19/22.




  3. #3
    Member bruisr's Avatar
    Join Date
    Jul 2010
    Posts
    69
    Thank-You! I'll opt. for better quality and selection of sizes on my next tool kit
    1993 TW/1200 origional miles/FMF/Clarke Tank/Pro Bend Hand Guards/Pro Taper chain/Larger Foot Pegs/Pro Taper grips/PIAA 35w/Cyclorack/LED stock turn signal conversion/Storage tubes/Kenda 270 5.10 front tire/Glock 45 Handle Bar mount(for the desert runs)!

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Junior Member aktw200's Avatar
    Join Date
    Jul 2010
    Posts
    26
    That's pretty basic.
    2007 TW200, Café Shield, Rear Cyclerack, Ricochet Skid Plate.

  6. #5
    Senior Member JarrodWeaver's Avatar
    Join Date
    Jul 2010
    Location
    Austin, Texas
    Posts
    112
    Check out CruzTools they make MC specific kits of very high quality tools in a sturdy nylon bag with HD zipper. I'm sure you could source similar tools cheaper but not better or more conveniently.

  7. #6
    Member eviee1973's Avatar
    Join Date
    Jul 2010
    Location
    1999 TW200 Dartmouth, Nova Scotia
    Posts
    42
    My complaint with Yamaha is the small area for tool storage, you cannot store long wrenches, or any extra tools in their storage area. Other than add on tubes, such as the welding rod carrier I attached to my rear rack, does any one have suggestions or pictures of tool storage ideas?

  8. #7
    Senior Member betopimienta's Avatar
    Join Date
    Jul 2010
    Location
    Texas
    Posts
    158
    Quote Originally Posted by eviee1973 View Post
    My complaint with Yamaha is the small area for tool storage, you cannot store long wrenches, or any extra tools in their storage area. Other than add on tubes, such as the welding rod carrier I attached to my rear rack, does any one have suggestions or pictures of tool storage ideas?




    I just purchased 4 of these . Heck, they are so cheap i could not pass them up.

    storage containers



    Other members have installed these on thier TDubs and seem to like them.



    the famous storage tube

  9. #8
    Member bruisr's Avatar
    Join Date
    Jul 2010
    Posts
    69
    I just ordered 3 storage tubes along with my rear cyclorack. I don't plan to use the tool storage area that came with the bike.
    1993 TW/1200 origional miles/FMF/Clarke Tank/Pro Bend Hand Guards/Pro Taper chain/Larger Foot Pegs/Pro Taper grips/PIAA 35w/Cyclorack/LED stock turn signal conversion/Storage tubes/Kenda 270 5.10 front tire/Glock 45 Handle Bar mount(for the desert runs)!

  10. #9
    Senior Member admiral's Avatar
    Join Date
    Jul 2010
    Location
    Frosty Hollow
    Posts
    12,971
    I'll call this the Cresenthammer. Kind of a neat idea. I might make one of these for not just the TW, but for other vehicles/uses. Can also make different sized cresenthammer's as well.







    Found this is a guy's post on PNWDualSport Website and thought I would share.
    Hidden Content A ride in the woods helps me relax and release tension. The fact I'm dragging a body should be entirely irrelevant?

  11. #10
    Senior Member srs713's Avatar
    Join Date
    Jul 2010
    Location
    Smyrna, GA, USA
    Posts
    1,417
    Quote Originally Posted by admiral View Post
    I'll call this the Cresenthammer. Kind of a neat idea. I might make one of these for not just the TW, but for other vehicles/uses. Can also make different sized cresenthammer's as well.







    Found this is a guy's post on PNWDualSport Website and thought I would share.


    Very cool idea... Everyone uses the crescent wrench ta bang on things anyway!
    LagoonRekkie likes this.
    Stephen S.

    '07 TW200:

    15/50 sprockets, O-ring chain, D2Moto foot pegs

    tweaked carb (127.5 jet, 0.019 needle shim, idle screw @2.25),

    Rubbermaid "Action Packer" on homemade brackets

Page 1 of 2 12 LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Do you have a chain tool that you like?
    By old white truck in forum Technical Help
    Replies: 4
    Last Post: 06-09-2013, 11:02 AM
  2. tool boxh
    By ridgeline in forum Performance and Customization
    Replies: 11
    Last Post: 05-30-2013, 01:52 PM
  3. Tool Box
    By r80rt in forum Performance and Customization
    Replies: 10
    Last Post: 05-27-2013, 12:02 PM
  4. Tool Kit
    By scotti158 in forum General Discussion
    Replies: 6
    Last Post: 05-14-2013, 03:35 PM
  5. Tool Tube
    By lyfestyl in forum General Discussion
    Replies: 3
    Last Post: 08-19-2012, 09:00 PM

Search tags for this page

1993 tw200 tool kit location
,
does the 07 tw 200 have a tool kit
,
tw 200 tool kit
,

tw200 tool kit

,

tw200 tool kit location

,
tw200 toolkit
,
tw200 tools
,
what all is in a tw200 tool kit
,
whats in the factory tw200 toolkit
,
where is the tw200 tool kit
,

yamaha tw 200 tool kit

,

yamaha tw200 tool kit

Click on a term to search for related topics.