Might not be in the right place...
Close
         
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree1Likes

Thread: Might not be in the right place...

  1. #1
    Senior Member Flathats's Avatar
    Join Date
    Jun 2014
    Location
    Idaho
    Posts
    657

    Might not be in the right place...

    Does anybody have any experience with 8N Ford three point Arm hydraulics?

  2. #2
    Super Moderator littletommy's Avatar
    Join Date
    Mar 2013
    Location
    Spokane, Washington
    Posts
    17,289
    Ask Mel.
    1st John 1:9
    If we confess our sins, He is faithful and just to forgive us our sins, and to cleanse us from all unrighteousness.

    John 3:16
    For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.

    John 3:17
    For God sent not his Son into the world to condemn the world; but that the world through him might be saved.

    Hidden Content <<<Click here. Hidden Content

  3. #3
    Senior Member Flathats's Avatar
    Join Date
    Jun 2014
    Location
    Idaho
    Posts
    657
    Will do...Thanks!

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Super Moderator littletommy's Avatar
    Join Date
    Mar 2013
    Location
    Spokane, Washington
    Posts
    17,289
    Fred might have some info also, although not really sure on that. I know he has a tractor.
    1st John 1:9
    If we confess our sins, He is faithful and just to forgive us our sins, and to cleanse us from all unrighteousness.

    John 3:16
    For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.

    John 3:17
    For God sent not his Son into the world to condemn the world; but that the world through him might be saved.

    Hidden Content <<<Click here. Hidden Content

  6. #5
    Senior Member rurlndum's Avatar
    Join Date
    Jun 2013
    Posts
    463
    Quote Originally Posted by Flathats View Post
    Does anybody have any experience with 8N Ford three point Arm hydraulics?
    Yes Ma'am or Sir I do.


  7. #6
    Mel
    Mel is offline
    Senior Member Mel's Avatar
    Join Date
    Jan 2013
    Location
    San Luis Obispo, Calif.
    Posts
    1,174
    Littletommy is right. I have a lot of experience with them. My guess is your 3 point will not stay up when you lift something? Use the forum (someone else might like to hear the discussion), or PM me.
    Mel
    rurlndum likes this.

  8. #7
    Banned qwerty's Avatar
    Join Date
    Jul 2010
    Location
    NW Tennessee
    Posts
    10,664
    I have a Red Belly that's been in the family longer than I have. Son just finished a ground-up restoration. Be happy to pass a question on to him.




  9. #8
    Senior Member mhomadness's Avatar
    Join Date
    Mar 2012
    Location
    Boonville, No.-Calif.
    Posts
    1,357
    And what's the issue? Inquiring minds want to know... m.

    EDIT: Not being a smart ass, just wanted more info...
    Last edited by mhomadness; 09-12-2014 at 12:01 AM.

  10. #9
    Senior Member Flathats's Avatar
    Join Date
    Jun 2014
    Location
    Idaho
    Posts
    657
    Sorry, busy raking hay... I have both an 8n and 860 that had set for some time...drained and replaced hydraulic fluid...no filters on either tractor...arms go up and down fine but stutter real bad and very slow when the outside temp gets around 40...Just wondering if some of the orifices are partially plugged?

  11. #10
    Mel
    Mel is offline
    Senior Member Mel's Avatar
    Join Date
    Jan 2013
    Location
    San Luis Obispo, Calif.
    Posts
    1,174
    I have to asked, if the tractors sat outside, are the rubber boots on the gear shift levers good? If they are not, it will allow rain water to run down the shift lever and into the transmission/differential housing. The 8n hydraulic pump draws from the bottom of that housing, thus drawing the water oil mixture into the system. I would suggest thinning the oil with diesel fuel, and cycling the lift arms many times to help flush the system. The other common problem on these tractors, is the combination pressure relief/check valve on the pump fails. There are no orifices in those systems. Is it only jerky going up? Going down? Both?
    Mel

Page 1 of 2 12 LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Spotted a TW in a weird place
    By nfpgasmask in forum General Discussion
    Replies: 3
    Last Post: 08-02-2014, 04:42 PM
  2. Oil drain plug known to freeze in place?
    By silverhead in forum Technical Help
    Replies: 6
    Last Post: 04-23-2013, 10:24 AM
  3. Best place to order OEM parts
    By nfpgasmask in forum General Discussion
    Replies: 13
    Last Post: 12-14-2012, 10:32 PM
  4. Nice place for lunch. . . OH NO!
    By Herc'sHepster in forum General Discussion
    Replies: 22
    Last Post: 06-26-2012, 10:37 AM
  5. Best Place to buy 1987 CDU
    By ldw72120 in forum General Discussion
    Replies: 7
    Last Post: 04-22-2012, 08:15 PM