Rim Swap or Different size tire for BW80
Close
         
Results 1 to 8 of 8
  1. #1
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    I need a new rear tire for my bw80. Does anyone know where I may be able to find one? Closest I can find is a 18x7-7 but I dont want to make my big wheel tires smaller!
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  2. #2
    Banned qwerty's Avatar
    Join Date
    Jul 2010
    Location
    NW Tennessee
    Posts
    10,664
    Dunlop KT587

    Kenda K530 Pathfinder



    Both come in 18x8-7. Have you tried google?




  3. #3
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    The KT587 is the stock rear tire and there is ONE place online that says they are in stock for $103. I have emailed them to see if they truly do have them. If I could find a pathfinder that is 18x8-7 I would like to get one, but I can only find them in 18x7-7.



    ...and of course i've tried google
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Banned qwerty's Avatar
    Join Date
    Jul 2010
    Location
    NW Tennessee
    Posts
    10,664
    http://motorcycleparts2u.com/dunlop-...tire-319298-tr

    http://www.fredericktownyamaha.com/e...86B__KT587.htm

    http://www.bruttspecialtytires.com/d...ze-18-8-7.html

    http://www.oldbikebarn.com/Dunlop-AT...x7-REAR-DUNLOP

    http://www.kazumausaonline.com/18x87...e-p-12674.html



    Your googlefu is weak. All the above claim to have at least one Dunlop in stock. Prices start at high-60s. Wise to verify availability before sending money--most online sources order from Tucker Rocky or Parts Unlimited AFTER they get your money. Might be wise to verify and order over the phone due to limited supply.



    I checked with the folks at Greenball. Cheng Shin, Kenda, and Dunlop have all discontinued any tires in the 18x8-7 size. Better get a lifetime supply while you can.




  6. #5
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    Thanks qwerty. I have checked these sites and they all seem to be out of stock as well as many other sites Should I be trying to find an 8" rim so I will have options down the road?
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  7. #6
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    Ok. I'm leaning towards buying a taller rim so I will have tire options down the road. Can anyone help me figure out how to do this? As of tonight all I know is the wheel is 8" tall and has three mounting holes.



    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  8. #7
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    I did find a few 19x8-7 duro atv tires for about $50 a piece. Would that mean the tire is 1/2" closer to the fender. If so, I would think there is enough room for that to work.



    I did see that someone raised the rear end by making this-



    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  9. #8
    Banned qwerty's Avatar
    Join Date
    Jul 2010
    Location
    NW Tennessee
    Posts
    10,664
    Measure the wheel mounting bolt circle diameter, the diameter of the bolts, and the distance from a straight edge layed across the bed of the wheel on each side to the mounting surface (side that goes against hub). "Offset" is simply the difference between the mounting surface and halfway between the beads. You can determine your offset easily. If the mounting surface is the same distance from both beads, you have "No" or "0" offset. If one bead is 20mm closer to the rim than the other, your offset is 10mm. If the mounting surface is closer to to the hub side bead, you have positive (+) offset. If the mounting surface is further from the hub side bead, you have negative (-) offset. By knowing the offset, you can select a wheel that has a different width between the hubs than stock and still keep it properly centered in the swingarm.



    Calculate the difference between the distances from each bead to the mounting surface and divide by 2 to determine the "offset".



    Running an inch taller tires certainly wouldn't hurt anything if they clear the hard parts. You'll probably want to run a bit larger wheel sprocket to compensate for the taller rolling radius. Don't assume an inch taller in the size designation translates to an inch taller tire or a 1/2-inch decrease in clearance. That idea "should" work, but often doesn't.




Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. bar swap
    By YTWTX in forum Performance and Customization
    Replies: 35
    Last Post: 10-15-2014, 12:49 PM
  2. BW80 handlebar swap
    By PalmStateCrawler in forum Off-Topic
    Replies: 0
    Last Post: 09-05-2012, 11:39 PM
  3. 06 fork swap to 98
    By titanium in forum Performance and Customization
    Replies: 3
    Last Post: 04-14-2012, 07:07 AM
  4. TW tire size?
    By retro in forum Performance and Customization
    Replies: 2
    Last Post: 10-19-2011, 03:40 PM
  5. Yamaha BW80 headlight?
    By PalmStateCrawler in forum Off-Topic
    Replies: 10
    Last Post: 09-29-2011, 12:23 PM

Search tags for this page

18-8-7 atv tire
,
18x8-7 tire
,
18x8-7 tires
,

19x9x7 atv tires

,

bw 80 rear tire

,
bw80 rear tire
,

bw80 tires

,
yamaha big wheel 80 rear tire
,

yamaha bw 80 tires

,

yamaha bw80 forum

,

yamaha bw80 rear tire

,

yamaha bw80 tire size

Click on a term to search for related topics.