apology
Close
         
Results 1 to 7 of 7

Thread: apology

  1. #1
    Member Bizz's Avatar
    Join Date
    Apr 2013
    Location
    Inverness QC
    Posts
    46
    I would like to apologize about what I said in a message this morning ... I wanted to make a joke but I think it was bad because I lost reputation point



    I'm not entirely familiar with all the regulations of the forum because I speak french



    sorry if I hurt someone
    I do not speak very good English .. so sometimes what I write may seem foolish

    thank you for your understanding

  2. #2
    Senior Member srs713's Avatar
    Join Date
    Jul 2010
    Location
    Smyrna, GA, USA
    Posts
    1,417
    Don't worry about it. Someone might have just clicked something by mistake.



    Looking at the member list I noticed a scattering of -1 ratings. Probably 90% of the ratings are at 0, and just a few of us are up in the double digits.



    I saw one guy at -10... now that is bad.
    Stephen S.

    '07 TW200:

    15/50 sprockets, O-ring chain, D2Moto foot pegs

    tweaked carb (127.5 jet, 0.019 needle shim, idle screw @2.25),

    Rubbermaid "Action Packer" on homemade brackets

  3. #3
    Senior Member DonBenito's Avatar
    Join Date
    May 2012
    Location
    Tucson, AZ
    Posts
    976
    If you haven't seen them, these are the Posting Guidelines.



    I don't believe I saw the post you are apologizing for, but assuming it was an honest mistake and not a pattern of vulgar or offensive behavior, this is a great community and I'd wager more than willing to forgive.



    Best of luck to you navigating the Anglo-Franco language barrier, it's more than I would attempt!
    2011 TW200 - Sold - after 9700 miles and 1,000,000 smiles. So long Tee Dub!
    2012 KLR650
    - Sold
    2013 Tiger Explorer XC
    2014 CB500X - RRP L3

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member Rainman's Avatar
    Join Date
    Jul 2010
    Location
    Ephrata, WA
    Posts
    1,125
    No biggie. I'm sure who was offended appreciates your apology. My hat is off to all of you who don't speak English as a first language. Although your written English isn't always perfect your "TW talk" comes through perfectly. I would never attempt to speak your language because I would fail miserably.



    You are a good person for apologizing.
    If you can't find it, grind it

    1990 TW200

  6. #5
    Senior Member rmcglad55's Avatar
    Join Date
    Jul 2010
    Location
    Fleming Island, Florida
    Posts
    287
    Bizz,

    I am always apologizing for one thing or another. You seem to be one of the good guys!
    Rusty

    2005 TW200

    2005 Triumph Bonneville T100

  7. #6
    Member Bizz's Avatar
    Join Date
    Apr 2013
    Location
    Inverness QC
    Posts
    46
    thank you for your support This is very appreciated



    I'm new and I would not want to be tagged as a bad guy because I'm not



    from now I can stop to worry about that and start talking about my new passion ...... TW200
    I do not speak very good English .. so sometimes what I write may seem foolish

    thank you for your understanding

  8. #7
    Senior Member silverhead's Avatar
    Join Date
    Apr 2013
    Location
    Central Iowa, USA
    Posts
    310
    I'm just who I am. If they let us get up over -10, no big deal, right?



    I try not to bring up politics and I try not to be matter of fact where I try to push my -opinion- over top of someone else's opinion. Otherwise I try to be helpful and always post a lot of photos. Probably too many photos, and too much 'help' usually, haha!



    Also you have to be careful when correcting people, even if they're obviously wrong
    1993 TW200

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Humour - Apology to a mugger
    By Petrus in forum Off-Topic
    Replies: 2
    Last Post: 08-25-2010, 02:40 PM

Search tags for this page

tci tw200 rack opinion

Click on a term to search for related topics.