WOW!!!!!!!!! Very nice.
I have had many requests to post photos of the lights, so here they are. Disclaimers: 1. My camera is not the best quality and does not truely do justice to the visibility of the lights. 2. I can see from my photos that I need to adjust the leds out to the side a little more--it will create more lateral light and reduce the bright spot in the middle. I simply aimed them to one commom center spot when I set them up. 3. bike is on side stand.
Hid headlight is a 35w 4300K servo activated hi/lo beam type recommended by qwerty
LED lights are ADV Monster brand model 44
All lights are switched and the leds are on a wireless key fob dimmer switch with on off as well.
HID high beam
HID low beam
HID and LED
Do tell, do tell.
2005 TW200 (SOLD)
Thanks! Ive been wanting to see the output on the 44's for some time. I might have to snatch up a pare of those.
Any legal issues with the headlight and leds on? Anyone know?
YES the 44's will blind anything coming from the other direction. The light output is everywhere! Not just down and narrow like the stock headlight.
Dimmer added for on-road night time use. No problems so far. No flashes from other drivers and plenty of contact with law enforcement with lights on about 3/4 up as aimed in the photos. For on-road only, the model 30 should be used. They are spot lights and focus the light narrowly down the road. I chose the model 44 which are floods because I ride both on and off road.
Do you have a photo of the lights themselves? I can't really imagine what they would look like when installed.
Quite a nice modification though.
Just finished putting in the HID tuesday. Man they make a huge difference especially on the high beam. Hope to get a pair of leds here soon.