Ignitech Programmable DC-CDI
Close
    
    
Page 1 of 9 123 ... LastLast
Results 1 to 10 of 83
Like Tree10Likes

Thread: Ignitech Programmable DC-CDI

  1. #1
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    Have been emailing back and forth with Ignitech in the Czech Republic regarding a replacement CDI for my bike...



    "Yes - we can make unit DCCDIP for this bike.



    Unit we can prepare with same connector s as original unit. You will only

    have to connect one more wire from ignition to +12V key switched."



    Gotta leave town for a couple weeks for work, but hope to have one on my doorstep by the time I return. If anyone else is interested, shoot them an email ( [email protected] ). If your bike is a stock 87, or 88-97 they can ship you out a CDI that you plug into the stock connectors, connect one switched +12v wire and you are good to go. Double check with them regarding connectors for an '87 though.



    Unfortunately I am on my fourth conglomeration of an ignition system, so mine is a little messed up and I'll have to use different connectors... Mine is a cross between a 1991 and a 1998 system, and it still looks like this will be the easiest ignition system i have ever converted to
    ITCB

  2. #2
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    To clarify a little bit, this is a CDI that is powered by the battery in your bike, rather than the coil of wire inside your engine that is expensive and prone to go bad. Can kill two birds with one stone, here.
    ITCB

  3. #3
    Senior Member lizrdbrth's Avatar
    Join Date
    Jul 2010
    Location
    Desert, SoCal
    Posts
    7,369
    Quanto, Tonto?



    I can explain it to you, but I can't understand it for you.

    Powdercoated '87 frame, extended swingarm, YZ fork legs, ATV tire, 14/55, XT350 tank, spliced quick-release seat, disc brake conversion, beeg headlight, beeger rack, Lizrdcooler, Lizrdventz and bunch of other stuff all covered in invisible ink.

    Hidden Content

    Hidden Content

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    $175 for the programmable version at current exchange rate. Looks like $87 for the non-programmable version. That is the price with 20% "Value Added Tax" which I am not sure if we would have to pay or not, but figured I'd include it. So basically those are max prices without shipping. Without VAT it would be $146 / $73 respectively, plus shipping.
    Mart likes this.
    ITCB

  6. #5
    Senior Member lizrdbrth's Avatar
    Join Date
    Jul 2010
    Location
    Desert, SoCal
    Posts
    7,369
    I don't think we'd be subject to V.A.T., but Czech with the Czechs and I might write a czech for a programmable version.



    Is this a CD/laptop programable deal, or muliple options with dipswitches?



    I can explain it to you, but I can't understand it for you.

    Powdercoated '87 frame, extended swingarm, YZ fork legs, ATV tire, 14/55, XT350 tank, spliced quick-release seat, disc brake conversion, beeg headlight, beeger rack, Lizrdcooler, Lizrdventz and bunch of other stuff all covered in invisible ink.

    Hidden Content

    Hidden Content

  7. #6
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    Sorry for the delay, been flying all day, just hit denver



    You program it with a laptop/pc... hit up their site, you can download the programming software for free to check it out
    ITCB

  8. #7
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    This... This is how we do it



    ITCB

  9. #8
    Senior Member FortPayne's Avatar
    Join Date
    Nov 2011
    Location
    Alabama
    Posts
    326
    Any downside to the non programmable one performance wise?



    How bout shipping and timeframe? After my hassle wouldn't mind having a backup one of these days.
    Tenaciously Deviant Unwittingly Brilliant

  10. #9
    Senior Member lizrdbrth's Avatar
    Join Date
    Jul 2010
    Location
    Desert, SoCal
    Posts
    7,369
    Wow. So now my TW will rev to 15K?



    Who knew?





    Seriously, nice option. Programming looks simple enough even I could do it.



    Fort Payne, near as I can tell the stock unit puts advance at a static 10 degrees. So a non-programable unit set for 10 degrees should be equal.



    I can explain it to you, but I can't understand it for you.

    Powdercoated '87 frame, extended swingarm, YZ fork legs, ATV tire, 14/55, XT350 tank, spliced quick-release seat, disc brake conversion, beeg headlight, beeger rack, Lizrdcooler, Lizrdventz and bunch of other stuff all covered in invisible ink.

    Hidden Content

    Hidden Content

  11. #10
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    just got the invoice and paid it. 160 euros = 201 US dollars shipped for a CDI that will plug into the stock harness, and let you program it
    ITCB

Page 1 of 9 123 ... LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

cdi dc

,

cdi programmable

,

handmade cdi

,

ignitech

,

ignitech 87 tw200

,

ignitech cdi

,
ignitech cdi wr450
,

ignitech dccdip

,

ignitech tw

,

ignitech tw200

,

programmable cdi yamaha 200

,

programmable tw200 cdi

Click on a term to search for related topics.