Rear Mudguard Options for rebuild
Close
    
    
Results 1 to 7 of 7
  1. #1
    Junior Member bluebossa's Avatar
    Join Date
    Aug 2012
    Posts
    5
    Hi there,



    Just signed up for some inspiration having found a non runner TW125 from fleabay.







    Didn't run but a new battery, oil change and cleanup as well as a new plug got it firing again and I've since got the front brakes going and it no goes and stops which is in my books the basic requirement.



    So I've now stripped but all the plastic which has been very badly spray painted and plan to strip, paint and re-build as a hollow frame.



    I've seen a variety of pics on these forums and I now want to get some options for Rear Mudguards that I could maybe buy from eBay from other donor bikes that are wide enough and work for the TW.



    Want it to be Chrome and able me to put a number plate and lights back on the stock frame.



    Ideas please?
    TW125 - 2000

    Dnepr MT10-36 - 1982

  2. #2
    Senior Member zardoz's Avatar
    Join Date
    Aug 2012
    Location
    Nova Scotia
    Posts
    187
    My bike has a trailer fender (from Princess Auto) over the rear wheel, don't know how this would fit for a stock framed Tdub but it works the treat for my custom dub



    z
    Full custom 2008 TW200/250 build pics of my bike... I call her TW (short for "Twice Wicked" for her almost doubled HP Hidden Content )



    Hidden Content



    Newest member of the herd... 1987 Honda CBX250... this bike will become a board tracker this summer



    Hidden Content



    Bought another bike last fall (2012) ... 1982 Kawasaki KZ305 it's a "mostly done" bobber project I got for practically nothing



    Hidden Content

  3. #3
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    Quote Originally Posted by zardoz View Post
    My bike has a trailer fender (from Princess Auto) over the rear wheel, don't know how this would fit for a stock framed Tdub but it works the treat for my custom dub



    z


    We may need to see that one!
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member zardoz's Avatar
    Join Date
    Aug 2012
    Location
    Nova Scotia
    Posts
    187
    Quote Originally Posted by PalmStateCrawler View Post
    We may need to see that one!




    Check the link to my build pics in my sig line



    z
    Full custom 2008 TW200/250 build pics of my bike... I call her TW (short for "Twice Wicked" for her almost doubled HP Hidden Content )



    Hidden Content



    Newest member of the herd... 1987 Honda CBX250... this bike will become a board tracker this summer



    Hidden Content



    Bought another bike last fall (2012) ... 1982 Kawasaki KZ305 it's a "mostly done" bobber project I got for practically nothing



    Hidden Content

  6. #5
    Senior Member Retrofit's Avatar
    Join Date
    Mar 2011
    Location
    Simi Valley So Calif.
    Posts
    395
    Quote Originally Posted by zardoz View Post
    Check the link to my build pics in my sig line



    z
    Lookz like that tank would solve my fuel problem.... Assume it's a direct bolt on with no mod required.

  7. #6
    Senior Member zardoz's Avatar
    Join Date
    Aug 2012
    Location
    Nova Scotia
    Posts
    187
    Quote Originally Posted by Retrofit View Post
    Lookz like that tank would solve my fuel problem.... Assume it's a direct bolt on with no mod required.


    The tank is only setting on the bike.. I do need to mod the tank to make it fit, but anticipate that it won't be that difficult. Once it's mounted and I'm satisfied I'll sell the stock tank to a forum member



    z
    Full custom 2008 TW200/250 build pics of my bike... I call her TW (short for "Twice Wicked" for her almost doubled HP Hidden Content )



    Hidden Content



    Newest member of the herd... 1987 Honda CBX250... this bike will become a board tracker this summer



    Hidden Content



    Bought another bike last fall (2012) ... 1982 Kawasaki KZ305 it's a "mostly done" bobber project I got for practically nothing



    Hidden Content

  8. #7
    Senior Member Point37's Avatar
    Join Date
    Sep 2011
    Location
    Southcoast MAsshole
    Posts
    2,661
    i made my own mudguard with sheet aluminum...not pretty but works good enough for me




Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Top End Rebuild Kit
    By Bobvreal in forum Technical Help
    Replies: 7
    Last Post: 10-07-2013, 07:36 AM
  2. Rear Sprocket options
    By aladdin in forum Technical Help
    Replies: 8
    Last Post: 02-27-2013, 10:50 AM
  3. rebuild of a TW
    By Havoc in forum Performance and Customization
    Replies: 4
    Last Post: 05-30-2012, 09:37 AM
  4. Front Mudguard raised.
    By Grant in forum Performance and Customization
    Replies: 6
    Last Post: 05-20-2012, 06:10 PM
  5. Head rebuild
    By whitewash in forum Technical Help
    Replies: 4
    Last Post: 08-04-2010, 07:58 PM

Search tags for this page

tw motobike 250 back mud guard

Click on a term to search for related topics.