Brake / Blinker light combo
Close
    
    
Results 1 to 6 of 6
  1. #1
    Member Uwdlk2no2's Avatar
    Join Date
    Dec 2012
    Location
    Mississippi
    Posts
    84
    Hello All,

    Has anyone seen or created a brake light blinker combo for the tw200? I haven't been able to find one and I'm not smart enough to know how to make my own. I would prefer a LED style but atm I just want to eliminate the rear blinkers from sticking out and was wondering if anyone has done this yet.



    Thanks,

    Lance
    2013 TW200

    2003 TW200 (Wife's Bike)

    2013 Ultra Classic Limited

    2008 Street Glide

  2. #2
    Senior Member mtkd's Avatar
    Join Date
    Feb 2012
    Location
    NY
    Posts
    215
    There are a couple ways to go about it.



    This one took some modification to the sub frame ( Sub frame broke and I was too cheap to buy a new one and needed a light. )

    https://tw200forum.com/index.php?/top...ail-light-mod/



    From what I remember at the time I did this, I couldn't find a tail light that mounted like ours that also had integrated turn signals.



    I am sure some googling or ebay browsing might turn one up though
    -Szj



    2001 TW

  3. #3
    Member Uwdlk2no2's Avatar
    Join Date
    Dec 2012
    Location
    Mississippi
    Posts
    84
    Thanks, I was checking out your post when you posted this :-)



    Lance
    2013 TW200

    2003 TW200 (Wife's Bike)

    2013 Ultra Classic Limited

    2008 Street Glide

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Member mra32's Avatar
    Join Date
    Dec 2012
    Location
    Pennsylvania
    Posts
    46
    You may have some luck with something like this:



    http://www.ebay.com/itm/Motorcycle-L...723245&vxp=mtr





    If you want to integrate it with the tail light, there are options like SZJ suggested, I've installed a number of OEM replacement integrated turn/tail lights (but never on the bikes they were intended for) and have always had to fab something up. If you want to go that route I can offer a few suggestions.



    I've also seen people get those strips of leds with adhesive on the back and coat the reflector surface of the tail light with them. Impressive, but lots of careful work and I think its kinda expensive.

  6. #5
    Senior Member mtkd's Avatar
    Join Date
    Feb 2012
    Location
    NY
    Posts
    215
    Could add those to something like this

    http://www.procycle.us/bikepages/tw2...led-tail-tw200
    -Szj



    2001 TW

  7. #6
    Senior Member ZXtasy's Avatar
    Join Date
    Dec 2010
    Location
    Moses Lake, WA
    Posts
    260
    https://tw200forum.com/index.php?/top...plus-panniers/



    look at my Custom Dynamics 9 led super bright tail/turn combo strip in this link. I have used them on streetbikes and off road for years, 60 bucks...very versatile!

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. How to: Brake light adjustments
    By Sharpline in forum Technical Help
    Replies: 3
    Last Post: 01-11-2018, 03:01 PM
  2. trouble with tail light install - DRC Edge Brake Light
    By kennythewalk in forum Technical Help
    Replies: 10
    Last Post: 07-13-2017, 08:36 PM
  3. brake light not working, bulb ok
    By bondfast in forum Technical Help
    Replies: 3
    Last Post: 08-11-2012, 07:47 AM
  4. Brake light always on
    By tfactor in forum Technical Help
    Replies: 3
    Last Post: 07-02-2012, 04:43 PM
  5. Will this brake light flasher work?
    By chevyy1212 in forum Technical Help
    Replies: 9
    Last Post: 01-22-2012, 10:27 AM