Tool Box
Close
    
    
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Tool Box

  1. #1
    Senior Member r80rt's Avatar
    Join Date
    Sep 2011
    Posts
    2,431
    I've been very careful to get my on board tool kit down to a minimum, But I'm planning a trip for next summer that will be long enough that an oil change will need to be done along the way. I'll want to carry a few extra tools along for that and other things. I already had an old tool box from a Honda ATC90 in my plunder, so I decided to put it to use. 99% of the time it will be empty, but when I need it I'll be happy it's there.





    Only a fool would attempt it, and God help me, I am that fool!

  2. #2
    Super Moderator littletommy's Avatar
    Join Date
    Mar 2013
    Location
    Spokane, Washington
    Posts
    17,257
    Nothing wrong with that at all, except it's too clean!
    1st John 1:9
    If we confess our sins, He is faithful and just to forgive us our sins, and to cleanse us from all unrighteousness.

    John 3:16
    For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.

    John 3:17
    For God sent not his Son into the world to condemn the world; but that the world through him might be saved.

    Hidden Content <<<Click here. Hidden Content

  3. #3
    Senior Member r80rt's Avatar
    Join Date
    Sep 2011
    Posts
    2,431
    I'll fix that tomorrow! It was black and cruddy, but I hit it with some Rustoleum metallic silver, it's a pretty close match for the frame now.
    Only a fool would attempt it, and God help me, I am that fool!

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member FortPayne's Avatar
    Join Date
    Nov 2011
    Location
    Alabama
    Posts
    326
    Looks good! Are you offroading with it mounted?
    Tenaciously Deviant Unwittingly Brilliant

  6. #5
    Senior Member r80rt's Avatar
    Join Date
    Sep 2011
    Posts
    2,431
    I'm not an aggressive rider and almost all of my riding in on dirt and gravel roads, or abandoned roads and logging trails. Not a lot of real off road riding is available here. The pictures make it look larger than it really is, it's only 6" long and 2 1/4 in diameter. I'm not concerned with any clearance problems, it's 11" above the ground and if it does get bashed, I've got another one
    Only a fool would attempt it, and God help me, I am that fool!

  7. #6
    Senior Member frog13's Avatar
    Join Date
    Jun 2011
    Location
    SW, Ohio
    Posts
    2,518
    Good thinking.

  8. #7
    Senior Member r80rt's Avatar
    Join Date
    Sep 2011
    Posts
    2,431
    Thank ya sir, I've ran some pretty rough trails for the last two days trying to find a problem with it, I can't find one. Not even a rock chip on the paint
    Only a fool would attempt it, and God help me, I am that fool!

  9. #8
    Senior Member patrick007's Avatar
    Join Date
    Jan 2013
    Location
    Red Deer, Alberta Canada
    Posts
    112
    I like it, looks good.

  10. #9
    Senior Member old white truck's Avatar
    Join Date
    Sep 2012
    Location
    Northwestern Oregon
    Posts
    1,092
    Let's see what is INSIDE your tool kit.

  11. #10
    Senior Member r80rt's Avatar
    Join Date
    Sep 2011
    Posts
    2,431
    I carry a shortened 3/8 drive ratchet, two 2" extensions, 8mm, 10mm, 12mm sockets in the front tool carrier. To the stock tool kit I've added a 5mm allen wrench, and a 19mm box end, I replaced the stock pliers with needle nose vice grips. I know the factory screw driver is cheesy but I left it in just in case, I've changed all the phillips head screws to allen head or 8mm head so I should never need the screwdriver.

    I added the 19mm for the axles, you need a 19 and a 22mm for the rear, the factory kit has a 19 and 22mm but they are on the same wrench, kinda makes it hard to hold both sides. And for the front you need two 19mm's.





    Only a fool would attempt it, and God help me, I am that fool!

Page 1 of 2 12 LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. TW Tool Kit
    By bruisr in forum General Discussion
    Replies: 12
    Last Post: 09-28-2014, 08:48 PM
  2. Do you have a chain tool that you like?
    By old white truck in forum Technical Help
    Replies: 4
    Last Post: 06-09-2013, 11:02 AM
  3. tool boxh
    By ridgeline in forum Performance and Customization
    Replies: 11
    Last Post: 05-30-2013, 01:52 PM
  4. Tool Kit
    By scotti158 in forum General Discussion
    Replies: 6
    Last Post: 05-14-2013, 03:35 PM
  5. Tool Tube
    By lyfestyl in forum General Discussion
    Replies: 3
    Last Post: 08-19-2012, 09:00 PM

Search tags for this page

tool kit

,

tw200 tool box

Click on a term to search for related topics.