Carb Work
Results 1 to 2 of 2

Thread: Carb Work

  1. #1
    Junior Member jakemistake's Avatar
    Join Date
    Jul 2010
    Way Out West
    Been working on my carb (TK carb), here's what I done, maybe you guys/gals have some experiences that have worked good? Lets hear them! 1) Shimmed the needle jet by .030, helped quite a bit. 2) Turned the front air screw out to one turn, cured the hesitation at low speed. Still get a little hesitation at 45-50 miles per hour. Will adjust the float level and see what happens. What else is there left to do? Any ideas?
    When in doubt, Gas it!

  2. #2
    Senior Member davidsonsgccc's Avatar
    Join Date
    Jul 2010
    chickamauga, Ga.
    check the old archives there is alot of very good info on carbs jetting and such.
    not a TW owner but i play one on this forum.

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. '94 Carb Work
    By Omega Man in forum Technical Help
    Replies: 3
    Last Post: 06-03-2013, 07:42 PM
  2. Painful Day at Work
    By cptrout in forum Off-Topic
    Replies: 1
    Last Post: 12-04-2012, 06:26 PM
  3. First ride to work......
    By kenfyoozed in forum General Discussion
    Replies: 7
    Last Post: 09-28-2012, 01:51 PM
  4. Can't get right after Carb work
    By SURVEYWATERS in forum Technical Help
    Replies: 9
    Last Post: 03-29-2012, 04:49 PM
  5. Carb work
    By 805gregg in forum Performance and Customization
    Replies: 4
    Last Post: 02-18-2011, 08:18 AM