Where does this wire go?
Close
    
    
Results 1 to 4 of 4
  1. #1
    Member tok-tokkie's Avatar
    Join Date
    Jul 2010
    Location
    Cape Town, South Africa
    Posts
    88
    I have had my engine overhauled. I am now re-fitting the engine & I have this wire which I don't remember where it went.





    Can anyone tell me where it goes. I suspect it may be the neutral indicator but I don't want to take the cover off unless I am sure. It looks like the round push in connector fits into the collection with the alternator wires at the battery.



    '---------------

    Second question. There is a two part rubber tube on the carb. 1 part goes down & is the overflow. Does the other part just goe up under the tank threaded next to the wire loom as a breather? That is what I remember but it was quite a while ago when I removed the engine & the TW workshop manual has very poor photos but says nothing about these tubes. There is a separate larger rubber tube that starts between the carb & cylinder head leading up the same way ending in a metal tube thing.

  2. #2
    Senior Member uktw125's Avatar
    Join Date
    Jul 2010
    Location
    Devon, England.
    Posts
    614
    Looks like your neutral light switch wire. It goes just by the gear shifter (forked end) and plugs in the other end by the battery there are a few wires in a rubber sheath.

  3. #3
    Senior Member christddel's Avatar
    Join Date
    Oct 2010
    Location
    Belgium
    Posts
    376
    Quote Originally Posted by uktw125 View Post
    Looks like your neutral light switch wire. It goes just by the gear shifter (forked end) and plugs in the other end by the battery there are a few wires in a rubber sheath.


    Hello,

    Exactly...




  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Member tok-tokkie's Avatar
    Join Date
    Jul 2010
    Location
    Cape Town, South Africa
    Posts
    88
    Quote Originally Posted by christddel View Post
    Hello,

    Exactly...



    Many thanks. I thought so but did not want to take the cover off without being certain.

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Cdi yellow wire
    By GrantM in forum Technical Help
    Replies: 20
    Last Post: 04-29-2013, 10:11 AM
  2. Burnt red wire
    By snakefoot in forum Technical Help
    Replies: 4
    Last Post: 07-15-2012, 08:15 AM
  3. How to change the spark plug wire?
    By Sverige21 in forum Technical Help
    Replies: 3
    Last Post: 05-27-2011, 08:37 PM
  4. Spark plug wire change
    By demarko69 in forum Technical Help
    Replies: 3
    Last Post: 04-20-2011, 08:30 PM
  5. Wiring Question - Where does this wire go???.
    By Grant in forum Technical Help
    Replies: 7
    Last Post: 12-25-2010, 12:31 PM