I could only find two posts
https://tw200forum.com/forums/79169/ShowPost.aspx
https://tw200forum.com/forums/97875/ShowPost.aspx
Hello, I tried to search the old forums for info on installing the Borrego rack. The search option didnt seem to work so I'll ask here. Has anyone installed this rack and if so is there an issue with having to cut wires on the turn signals?
My wife has been hinting around that my b-day present should be here today, so hopefully I'll be installing the rack this evening.
I could only find two posts
https://tw200forum.com/forums/79169/ShowPost.aspx
https://tw200forum.com/forums/97875/ShowPost.aspx
I got the Borrego rack yesterday and installed it in about 15 minutes. It seems to fit real well, the only issue is that it does cause the rear of the seat to sit on the cross bar of the rack that is under the seat. It installs without a problem, it just causes the very back of the seat to sit up a little bit. Hopefully the contact point doesn't wear on the seat material where it hits the bar. Other than that I like it. I'll post up some pictures of it when I get a chance.
https://tw200forum.com/forums/101145/ShowPost.aspx
i have that rack too. i trimmed my rubber bumpers under the seat, pulled the staples out, used a hacksaw and took a little plastic off the seat pan, then restapled it. there are some pics in that thread i linked.
Connect With Us