more carb questions
Results 1 to 3 of 3
  1. #1
    Senior Member demarko69's Avatar
    Join Date
    Feb 2011
    OK I am fighting a fuel problem with 87 TW200. The guy before me said it was rebuilt, and Im not to sure it was done correctly. Run good, then bad, then good, then bad. Like fuel starvation.

    As I look at the 87 service manual I see that there are a few orings. Number (11). The drawing shows a oring above the collar of number (12). Mine did NOT have this on, only the one near the bottom close to the threads on number (12)

    Same thing on the float valve. there is a oring pictured (11) above the valve body, mine DID NOT have this one, only the one that on the body itself, below the the little screen cap.

    Please give me some guidance, thanks

  2. #2
    Senior Member Snake2715's Avatar
    Join Date
    Aug 2010
    I am newer to carbs as well. however I am fairly certain that the 1987-2000 carb were the same..

    Check my thread here where I have a few pics. The orings should be in he right spot here. I dont have the original link to some of these pictures.

    Good luck.

  3. #3
    Senior Member demarko69's Avatar
    Join Date
    Feb 2011
    Great info and pics

    thank you very much

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. Lazy Man's Carb Cleaning Questions
    By Avi Kwame in forum Technical Help
    Replies: 30
    Last Post: 04-09-2013, 07:06 PM
  2. A few questions
    By nfpgasmask in forum General Discussion
    Replies: 7
    Last Post: 12-10-2012, 01:30 PM
  3. Carb questions
    By RisingSun in forum Technical Help
    Replies: 5
    Last Post: 09-01-2011, 11:33 PM
  4. last round of carb questions
    By phazer in forum Technical Help
    Replies: 4
    Last Post: 08-06-2011, 05:44 AM
  5. Newer CV carb vs. older carb. MPG
    By number356 in forum Technical Help
    Replies: 6
    Last Post: 03-28-2011, 11:25 AM