Carb Rebuild Kit
Close
    
    
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member DetroitRed's Avatar
    Join Date
    May 2011
    Posts
    8
    My 1987 TW200 has developed a carb leak. I believe that it's the float needle and/or the seat o-rings. Does anyone have any ideas where I can get a rebuild kit with those items and the other O-rings for this Teikei kikaki carb?

  2. #2
    Senior Member jbfla's Avatar
    Join Date
    Jul 2010
    Location
    FL. GA, NC
    Posts
    2,399
    There is a rebuild kit offered on Ebay. However, those who have purchased it have not been very pleased with the contents.



    It's best to buy the individual pieces from an online OEM parts vendor.



    Recently I have been very pleased with the prices and reasonable shipping of Ron Ayers.



    http://www.ronayers.com/



    But there are others.



    jb
    2018 Triumph Street Twin..............2016 CB500F
    2014 XT250 ..................................2008 H-D Softail Deluxe
    2008 SV 650..................................2007 DR 650..

  3. #3
    Junior Member DetroitRed's Avatar
    Join Date
    May 2011
    Posts
    8
    Quote Originally Posted by jbfla View Post
    There is a rebuild kit offered on Ebay. However, those who have purchased it have not been very pleased with the contents.



    It's best to buy the individual pieces from an online OEM parts vendor.



    Recently I have been very pleased with the prices and reasonable shipping of Ron Ayers.



    http://www.ronayers.com/



    But there are others.



    jb

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Junior Member DetroitRed's Avatar
    Join Date
    May 2011
    Posts
    8
    thanks JB. I will look into that.

  6. #5
    Senior Member kelly b's Avatar
    Join Date
    Mar 2011
    Location
    Indianapolis, IN
    Posts
    162
    I bought the ebay kit. I just restored a 93, put all the desirable farkles on, and was most satisfied w/that rebuild kit. Loved the oversized jet that created the super smooth idle and took away most of the cold running issues I had prior. Best $35 I spent on the whols restore!

  7. #6
    Senior Member jbfla's Avatar
    Join Date
    Jul 2010
    Location
    FL. GA, NC
    Posts
    2,399
    Kelly, thanks for the update on the Ebay rebuild kit,



    It's good to hear a favorable review.



    jb
    2018 Triumph Street Twin..............2016 CB500F
    2014 XT250 ..................................2008 H-D Softail Deluxe
    2008 SV 650..................................2007 DR 650..

  8. #7
    Senior Member elime's Avatar
    Join Date
    Jul 2010
    Location
    San Jose, CA
    Posts
    6,985
    Quote Originally Posted by kelly View Post
    I bought the ebay kit. I just restored a 93, put all the desirable farkles on, and was most satisfied w/that rebuild kit. Loved the oversized jet that created the super smooth idle and took away most of the cold running issues I had prior. Best $35 I spent on the whols restore!


    It sure must have been a different kit than the one I got off ebay. The one I got was dog do-do. The only part I am still using is the float bowl gasket. The float needle worked for a month or two and then started leaking. The high speed jet looked good but I didn't need it. All the other parts were just plane wrong. Hopefully the kit has been updated / corrected so all the parts now work.
    Long live the internal combustion engine!

  9. #8
    Junior Member jpalombo's Avatar
    Join Date
    Aug 2012
    Posts
    3
    I have the same issue, plus flooding while riding. How about this kit?

    http://www.motorcyclecarbs.com/CARBU..._P8904C697.cfm

  10. #9
    Senior Member FnMag's Avatar
    Join Date
    Jul 2010
    Posts
    493
    Check your petcock before going for the rebuild. It will only take a few minutes...



    Take fuel line off with petcock in off position. If you get the slightest dribble, it's the petcock. Mine was dripping once a second or so and it was enough to fill the bowl and make it leak.

  11. #10
    Junior Member jpalombo's Avatar
    Join Date
    Aug 2012
    Posts
    3
    Well, it doesn't leak when the fuel is off, but shouldn't it also not leak when the fuel is on?

Page 1 of 2 12 LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. New Carb Rebuild Kit
    By Mongo357 in forum Technical Help
    Replies: 20
    Last Post: 01-24-2015, 11:18 AM
  2. Top End Rebuild Kit
    By Bobvreal in forum Technical Help
    Replies: 7
    Last Post: 10-07-2013, 07:36 AM
  3. rebuild of a TW
    By Havoc in forum Performance and Customization
    Replies: 4
    Last Post: 05-30-2012, 09:37 AM
  4. carb rebuild kit for a 2007
    By mhussnatter in forum Technical Help
    Replies: 5
    Last Post: 03-18-2012, 09:41 AM
  5. Head rebuild
    By whitewash in forum Technical Help
    Replies: 4
    Last Post: 08-04-2010, 07:58 PM

Search tags for this page

1987 tw200 carb rebuild
,
1990 tw200 carb rebuild kit
,

1995 tw200 carburetor rebuild kit

,
carberator kit for yamaha 200tw
,

tw200 carb kit

,

tw200 carb rebuild

,

tw200 carb rebuild kit

,

yamaha tw200 carb rebuild

,
yamaha tw200 carburetor for sale
,
yamaha tw200 carburetor kit
,

yamaha tw200 carburetor rebuild kit

,
yamaha tw200 carburetor schematic
Click on a term to search for related topics.