Exhaust gasket
Close
    
    
Results 1 to 2 of 2

Thread: Exhaust gasket

  1. #1
    Member dawgs's Avatar
    Join Date
    Aug 2010
    Posts
    64
    I ordered a new exhaust gasket for 07' TW-200 and it does not look like what is there. The part number is correct according to several different part lists.



    The old "asbestos" gaskets on the header pipe are solid " asbestos" looking like 3/8" thick washers. There are two stacked together.

    The new one is metal with a very thin layer of a gasket material on it. It is 3/16" thick and much smaller in diameter that the ones on the header pipe.



    Anybody have a clue where this thing I have goes? Is there a heat proof sealer I could put on the old gaskets to seal them?



    Part number... 4BE-14613-00



    Thanks..............

  2. #2
    Member dawgs's Avatar
    Join Date
    Aug 2010
    Posts
    64
    Got it figured out. I put on my glasses and got out in the sun light. The new "gasket" goes in front of the gasket that comes new with the bike. The bolts did not appear long enough as the gasket was not in the correct position the first time I tried installing. They are and the metal gasket crushes a little as you tighten the bolts. Seals right up.

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Gasket Kit
    By jakemistake in forum Technical Help
    Replies: 1
    Last Post: 01-24-2013, 07:46 PM
  2. Base Gasket Leak
    By bogey72 in forum General Discussion
    Replies: 12
    Last Post: 08-26-2012, 10:54 PM
  3. Lower gasket
    By joedirt1970 in forum Technical Help
    Replies: 1
    Last Post: 05-17-2012, 07:00 PM
  4. gasket time!
    By YTWTX in forum General Discussion
    Replies: 4
    Last Post: 05-10-2012, 08:39 AM
  5. oil pump gasket??
    By operose in forum Technical Help
    Replies: 7
    Last Post: 04-09-2012, 09:26 PM