TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

1987 carb air fuel screw plug

1K views 3 replies 3 participants last post by  Lido 
#1 ·
Hello again does anyone know what is the best way to remove the brass plug to be able to get to the screw? Thanks in advance
 
#2 ·
Yeah, take a deck screw, screw it in a few turns and use a pair of pliers to pull the screw out and the plug should come with it. Some have said that they have had to drill out the hole a little to get the screw to start.
 
#3 ·
Yeah, take a deck screw, screw it in a few turns and use a pair of pliers to pull the screw out and the plug should come with it. Some have said that they have had to drill out the hole a little to get the screw to start.


Any small, pointy-tip screw will do. Deck screws usually work. I've also used small wood screws.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top