Oil leak solved!
Close
    
    
Results 1 to 3 of 3
  1. #1
    Senior Member bbagwell's Avatar
    Join Date
    Dec 2010
    Location
    Salem, Oregon
    Posts
    421
    I have had an oil leak for a while, been driving me nuts. Looks like crap when you park your bike and there is oil spots on the ground under it. The oil would pool up on the left hand side of the skid plate while parked. At first I thought it was the left side cover leaking, I put in a new gasket and sealed it all up while changing my chain and sprockets. I changed the o-ring on the drain bolt, made sure all the screws were tight on that side etc... It appeared to be coming from the center of the engine and then draining down to the left side while parked. I talked to a local shop in town and it would be an $800 dollar repair because they would have to pull the engine out, and basically completely tear it down. He advised checking the all the bolts and possibly putting some JB Water Weld on the bottom of the case to keep it from leaking.



    I went home and pulled the skid plate off and cleaned everything up so I could see where it was coming from. Well I found my problem. There was one really loose screw on the right side cover, another that was pretty loose, and about 2 more that needed a turn or two to be tight again. It was actually coming from the right side and running down to the left while parked on the kick stand. I got it all tightened up and went for a nice long ride, no leaks as of yet! I left it parked for about an hour and checked, the skid plate is still clean! I am glad I talked to the shop, gave me the idea to double check all the screws, not just the left side!



    I love easy fixes, especially free ones! I figure I would post this in case in helps someone else out.
    Bryan Bagwell

    1995 Yamaha TW200

    1983 Toyota PU

    2002 Suzuki Grand Vitara

  2. #2
    Senior Member B-dub's Avatar
    Join Date
    Jul 2011
    Location
    Southwest Utah
    Posts
    2,132
    Oh yeah, I'm with you - the easy fixes are especially nice. I'm glad you were able to track down your leak and get it stopped.
    My handle is B-dub, I ride a T-dub, and drive a V-dub.

  3. #3
    Member tw200_87's Avatar
    Join Date
    Jul 2010
    Posts
    62
    I just had the same problem. Tightend up the cover screws and problem solved

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Another 1987 CDI problem solved
    By vn_grnt in forum Technical Help
    Replies: 25
    Last Post: 11-18-2017, 10:12 AM
  2. 95 t dub carb problems solved
    By jhow67 in forum Technical Help
    Replies: 3
    Last Post: 09-23-2012, 11:56 AM
  3. EDIT seat trouble ------- Solved --------
    By Dmd3058 in forum Technical Help
    Replies: 8
    Last Post: 07-31-2012, 10:02 PM
  4. oil leak from where
    By jerz006 in forum Technical Help
    Replies: 7
    Last Post: 07-07-2012, 06:00 PM
  5. Replies: 12
    Last Post: 02-05-2012, 04:09 PM