Kick Starter Internals
Close
    
    
Results 1 to 3 of 3
  1. #1
    Senior Member Rainman's Avatar
    Join Date
    Jul 2010
    Location
    Ephrata, WA
    Posts
    1,125
    So I took off my right side engine cover and out came my kick starter springs, gear, washers, etc. It came out as a unit. I've taken off my cover many times before and this has never happened. I got it back in just fine, but does this shaft just float in the motor? Theres nothing holding it in except the engine cover right?
    If you can't find it, grind it

    1990 TW200

  2. #2
    Member sakogu's Avatar
    Join Date
    Jul 2010
    Location
    Penticton, BC, CANADA
    Posts
    64
    well the shaft centers itself in middle hole, it kinda wedge's itself in place against the front cover sealing itself with the washers


  3. #3
    Senior Member Rainman's Avatar
    Join Date
    Jul 2010
    Location
    Ephrata, WA
    Posts
    1,125
    Sakogu, thanks for the awesome diagram! I've got it back in, but just didn't know if anything held it in. Thanks again.
    If you can't find it, grind it

    1990 TW200

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. tw200 kick starter kit
    By grounder in forum Technical Write-Ups
    Replies: 16
    Last Post: 11-15-2013, 03:28 PM
  2. Why a Kick Starter?
    By Phantom99 in forum General Discussion
    Replies: 47
    Last Post: 11-11-2012, 02:41 PM
  3. kick starter kit
    By grounder in forum Technical Help
    Replies: 1
    Last Post: 02-28-2012, 05:25 PM
  4. Kick Starter Swap
    By Dubster in forum Technical Help
    Replies: 13
    Last Post: 02-10-2012, 06:15 AM
  5. New Kick Starter Added
    By vuldub in forum Technical Help
    Replies: 15
    Last Post: 06-08-2011, 11:12 AM