protaper bars
Close
    
    
Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: protaper bars

  1. #1
    Member Drifter's Avatar
    Join Date
    Aug 2012
    Location
    Lewiston,Idaho
    Posts
    96
    I looked at the protaper s.e. atv high bars on e-bay and some look to be really tall compared to the ones I have seen on some posts. Is there a difference?
    1994 TW

    Had but regrettably sold a 1982 KZ1000R Eddie Lawson Replica

  2. #2
    Senior Member AFISHALBIZ's Avatar
    Join Date
    Jul 2012
    Location
    SAN FERNANDO VALLEY & CENTRAL COAST
    Posts
    106
    Best eay is to go to a mc shop and look..then shop it...I got the mini bike bars.. flatter and narrower... love em!!!

  3. #3
    Senior Member retmotor's Avatar
    Join Date
    Dec 2011
    Location
    The Southwest
    Posts
    566
    Somebody correct me if I'm wrong, but the popular Pro-Taper are the ATV High? Link: http://www.amazon.com/Pro-Taper-Seri...I2MOQQZJZI6KTC



    There's no aftermarket motorcycle shop within a 100 miles of me, so these are the bars I plan on getting based on what I've read in the forum.



    edit: I should say Amazon is a bit famous for listing a pic that does not go with the product, so the link is for the product description, not the pic.
    The value of the internet is that when you're wrong someone will immediately correct you, and when you're right, someone will immediately correct you". Lizrdbrth

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member Bagger's Avatar
    Join Date
    Jan 2011
    Location
    Central WA
    Posts
    1,050
    Drifter, I think I can answer your question. I just put these on the Wife's TW:





    And here's the new bars compaired to the old bars:





    And the best example of the differance:





    And here they are installed:







    Hope this helps. There were no issues with cable length at all. She really likes the bars, and I have to admit that I like them better than my stockers with 2.5" Moose risers.



    Bag
    "The TW may be slow, but the Earth is patient" - MK

    "If I'm wrong, and it turns out that you hate it, I'll send you all my Barry Manilow albums." LB

    Hidden Content

  6. #5
    Senior Member YTWTX's Avatar
    Join Date
    Aug 2011
    Location
    Huntsville, Texas
    Posts
    186
    here was my write up on the bar swap. it was pretty painless to do.



    bar swap

  7. #6
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    Pro taper se atv highs are what I have and fit pefectly. I have yet to hear any complaints about these bars.
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  8. #7
    Senior Member mrbracket's Avatar
    Join Date
    Jul 2012
    Location
    Springtucky, Orygun
    Posts
    631
    I went with fatbars on my TW. I used the powermadd adjustable riser that converts the 7/8" stock mounts to 1-1/8" mounts. I love it! It raises the bars almost 4 inches and allows me to move the bars fore and aft to get the reach as comfortable as possible!! I also put Cycra handguards on it while I was at it. I got it all at procycle.us

    here's a link: procycle.us



    this bike just keeps getting better and better!



    You've got a friend in the Bracket Business! Hidden Content

    Get your TW200 Parts at ProCycle! Hidden Content

  9. #8
    Member Drifter's Avatar
    Join Date
    Aug 2012
    Location
    Lewiston,Idaho
    Posts
    96
    Quote Originally Posted by Bagger View Post
    Drifter, I think I can answer your question. I just put these on the Wife's TW:





    And here's the new bars compaired to the old bars:





    And the best example of the differance:





    And here they are installed:







    Hope this helps. There were no issues with cable length at all. She really likes the bars, and I have to admit that I like them better than my stockers with 2.5" Moose risers.



    Bag
    Thanks bagger that did it.some photos looked much like my stock bars, so when I saw these they looked huge.
    1994 TW

    Had but regrettably sold a 1982 KZ1000R Eddie Lawson Replica

  10. #9
    Senior Member PalmStateCrawler's Avatar
    Join Date
    Aug 2011
    Location
    Cayce, SC
    Posts
    3,109
    Those are not atv high bars! Those are "raptor" high bars which is an atv.
    '13 690 Enduro R too many frickin farkles...
    '07 KLX250 farkled (wife's bike)
    '86 BW80 farkled to size
    '10 TW200 you will be missed

  11. #10
    Senior Member Ayers Garage's Avatar
    Join Date
    Jun 2012
    Posts
    125
    Like he pointed out, those bars pictured above are Raptor bend which is different than Hi-ATV bend.



    These are the Hi-ATV bend like most guys use. I like them a lot.








Page 1 of 3 123 LastLast

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. protaper bars
    By YTWTX in forum Performance and Customization
    Replies: 34
    Last Post: 04-25-2016, 10:18 AM
  2. Troubleshooting: Protaper ATV High Handlebar Swap
    By Proud Highway in forum Performance and Customization
    Replies: 5
    Last Post: 04-30-2013, 06:11 AM
  3. Putting on Protaper bars this weekend
    By stephenmarklay in forum Performance and Customization
    Replies: 10
    Last Post: 04-21-2013, 06:47 PM
  4. Protaper Bars
    By Drifter in forum General Discussion
    Replies: 3
    Last Post: 10-13-2012, 03:58 PM
  5. New bars
    By joet3ch in forum Performance and Customization
    Replies: 5
    Last Post: 02-09-2012, 10:57 PM

Search tags for this page

installing tusk d flex handguards on pro taper bars

,

tw 200 pro taper bars

,

tw200 se bars and guards

Click on a term to search for related topics.