needle shim procedures
Close
    
    
Results 1 to 3 of 3
  1. #1
    Junior Member carp123's Avatar
    Join Date
    Jun 2012
    Posts
    3
    I have an 1989 california model that has run lean for many years. I have seen in the post reference to shimmimg the needle with washers. Can anyone explain the procedure (after removing the carb) for shimming the needle. Is there a specific sequence? thanks

  2. #2
    Member Drifter's Avatar
    Join Date
    Aug 2012
    Location
    Lewiston,Idaho
    Posts
    96
    There is an informative procedure on this on youtube.tw200 needle shim.
    1994 TW

    Had but regrettably sold a 1982 KZ1000R Eddie Lawson Replica

  3. #3
    Junior Member carp123's Avatar
    Join Date
    Jun 2012
    Posts
    3
    found it -- thanks

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. To shim or not to shim needle
    By kennethshaw in forum Technical Help
    Replies: 8
    Last Post: 01-26-2014, 01:32 PM
  2. shim sizes
    By raffles in forum Technical Help
    Replies: 2
    Last Post: 03-24-2013, 09:00 AM
  3. Just did the needle shim mod on my 88 dub have video
    By dz1 in forum Technical Write-Ups
    Replies: 5
    Last Post: 05-20-2012, 01:37 PM
  4. main jet shim
    By greendub in forum Technical Help
    Replies: 7
    Last Post: 05-14-2012, 07:38 PM
  5. Carb Needle Shim Question
    By sfsccoter in forum Technical Help
    Replies: 11
    Last Post: 09-16-2011, 12:05 PM

Search tags for this page

needle shim
,

tw200 needle shim

,
tw200 needle shim size
,
yamaha tw200 needle shim mod
Click on a term to search for related topics.