Throttle return spring
Close
    
    
Results 1 to 2 of 2
  1. #1
    Junior Member sailing502's Avatar
    Join Date
    Jan 2013
    Posts
    1
    I had removed the carb to clean and after installing the throttle no longer springs back like it did.

    The spring that is behind the plate for the throttle cables are you supposed to be able to add tension?

  2. #2
    Senior Member jbfla's Avatar
    Join Date
    Jul 2010
    Location
    FL. GA, NC
    Posts
    2,396
    I don't have a carb in front of me, but I remember it was tricky to get on properly.



    As I recall, you will need to get the spring in place on the pulley, then turn the pulley to put tension on the spring, then try to slide the tensioned spring-pulley assembly on the throttle plate shaft.



    Jb
    2018 Triumph Street Twin..............2016 CB500F
    2014 XT250 ..................................2008 H-D Softail Deluxe
    2008 SV 650..................................2007 DR 650..

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Return to Stock Rear Tire - Some Musings
    By vuldub in forum Performance and Customization
    Replies: 3
    Last Post: 05-16-2013, 10:53 AM
  2. missing throttle return cable
    By dubstep in forum General Discussion
    Replies: 1
    Last Post: 11-04-2012, 06:36 AM
  3. Clutch return spring
    By rwh7773 in forum Technical Help
    Replies: 2
    Last Post: 06-13-2012, 03:55 PM
  4. Throttle sticking
    By RingSteel in forum Technical Help
    Replies: 6
    Last Post: 02-29-2012, 01:20 PM
  5. Return to idle...
    By Jerry Lee in forum Technical Help
    Replies: 7
    Last Post: 08-27-2010, 10:44 PM

Search tags for this page

how do you assemble throttle spring on tw 200
,

how to remove the pulley cables from tw200

Click on a term to search for related topics.