Other OEM replacement "stock" mufflers for TW200's
Close
    
    
Results 1 to 7 of 7
  1. #1
    Junior Member johnquinnell's Avatar
    Join Date
    Apr 2013
    Posts
    4
    Hi, I'm new to this forum and currently in the process of restoring a TW200 for a friend. The muffler on the stock exhaust is shot and we're not interested in replacing it with a noisier "performance" muffler. TW's being a bit thin on the ground over here in Australia, I'm wondering if any readers would know if any other Yamaha or other bike brands of stock mufflers are a suitable replacement for the TW200 one?

    Thanks

    John Quinnell

    Sydney Australia

  2. #2
    Senior Member macbig2k1's Avatar
    Join Date
    Jul 2010
    Location
    Germany, Werdau
    Posts
    1,014
    I am not sure, that a exhaust from a other bike will fit.



    But there are replacement exhausts with a low noise level available.

    You should search for exhausts (street legal) for the European market. These exhausts must have a comparable noise level like the OEM exhaust to be street legal.

    These exhausts are marked with:

    - e-certified

    - homologated

    - with EG-ABE



    You can find some exhausts here:

    http://translate.google.com/translat...aha%26typ%3DTW

  3. #3
    Junior Member johnquinnell's Avatar
    Join Date
    Apr 2013
    Posts
    4
    Thanks for the information. We are definitely seeking a quieter muffler than all those performance type mufflers on offer. We just thought it might be as simple as sliding the muffler section off the exhaust and taking it to a local motorcycle wrecker to see if there are any similar sized/shaped sections available.

    Thanks again.

    John Quinnell

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Senior Member macbig2k1's Avatar
    Join Date
    Jul 2010
    Location
    Germany, Werdau
    Posts
    1,014
    Hi John,



    an other option is to buy a cheap performance exhaust (with dB-killer) and to modify it.

    It's possible to disassemble the muffler and to weld 2 or 3 small plates of perforated sheet into the perforated inner pipe.

    I made it by the same way on my muffler (on my MX-TW).

  6. #5
    Senior Member rm_hm's Avatar
    Join Date
    Jul 2010
    Location
    Near Narrows Bridges, WA State
    Posts
    1,619
    If your handy with welding and adapting.........







    lizrdbrth posted this awhile back





    Bottom is TTR/XT, top is TW. Yellow arrows are mounting bolt centers. You can also see the amount of dogleg in a TW pipe along with the different, more outboard rear mounting tab required to clear the tire. Generic or non-TW pipes are gunna involve some fiddling. The stockers appear to be nearly identical at first glance, but differ significantly between the three bikes, so be careful with aftermarket stuff.<br style="color: rgb(28, 40, 55); font-size: 13px; line-height: 19px; background-color: rgb(250, 251, 252);">





  7. #6
    Junior Member johnquinnell's Avatar
    Join Date
    Apr 2013
    Posts
    4
    Thanks for that macbig2k1.

    Modifying an aftermarket muffler to quieten down a little has been on the cards with us if another option doesn't spring up.

    Regards

    John Quinnell

    Sydney Australia

  8. #7
    Junior Member johnquinnell's Avatar
    Join Date
    Apr 2013
    Posts
    4
    Hey Rich, thanks for the pics. It confirms the muffler on our TW has been played around with by the previous owner (probably to get more sound out of it).

    Now I definitely have much food for thought.



    Cheers



    John Quinnell

    Sydney Australia

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. good replacement chain for use with stock sprocket size
    By grt1982 in forum Technical Help
    Replies: 28
    Last Post: 07-11-2011, 05:07 PM
  2. Need stock tw200 carb
    By Daltoncoody in forum TW200 Classifieds
    Replies: 3
    Last Post: 04-18-2011, 07:47 PM
  3. Replacement clutch recamendations, stock, EBC?
    By DBR0051 in forum Technical Help
    Replies: 7
    Last Post: 01-12-2011, 06:45 AM
  4. Just got my 2007 ALL STOCK TW200....
    By WhackedOutWizard in forum Performance and Customization
    Replies: 4
    Last Post: 11-06-2010, 05:01 PM
  5. Is odometer stock equipment? / Replacement lever(s)
    By jontow in forum General Discussion
    Replies: 0
    Last Post: 10-16-2010, 05:00 PM

Search tags for this page

tw200 muffler guard

Click on a term to search for related topics.