Chain Rivet Tool
Close
    
    
Results 1 to 4 of 4
  1. #1
    Moderator vuldub's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB Canada
    Posts
    652
    My press plate for the multisize chain riveting tool is too big for the 428 links. I am talking about the plate with the open holes:



    The holes are too far apart to the fit the 428 link size. Anyone have a press plate that fits our chain?
    Regards...Wes
    In the Stable: 73 Honda CT90,81 Honda CT110,81 Honda CT70,04 Yamaha TW200,07 Kawasaki Vulcan 1500

  2. #2
    Senior Member operose's Avatar
    Join Date
    Jul 2011
    Posts
    1,123
    Cannot help unfortunately, I use an angle grinder with cutoff wheel and "clip-style" masterlinks... by the looks of it though you could make one pretty easy, as long as you are accurate with measurements
    ITCB

  3. #3
    Junior Member chainslap's Avatar
    Join Date
    Jan 2012
    Posts
    26
    I'm pretty sure motion pro makes that part for the 428 chain. You could check with pro cycle. In the mean time you could press out one pin at a time. Rotate the block.

  4. Remove Advertisements
    TW200Forum.com
    Advertisements
     

  5. #4
    Moderator vuldub's Avatar
    Join Date
    Aug 2010
    Location
    Calgary, AB Canada
    Posts
    652
    Still can't find a press plate to fit the 428 chain. Motion pro (and all the others I have found) can break the 428 chain, but it appears a press on rivet style main link is rare for the 428, thus the chain tools don't provide a press plate for the 428. Anyone have a different experience?
    Regards...Wes
    In the Stable: 73 Honda CT90,81 Honda CT110,81 Honda CT70,04 Yamaha TW200,07 Kawasaki Vulcan 1500

Sponosred Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. TW Tool Kit
    By bruisr in forum General Discussion
    Replies: 12
    Last Post: 09-28-2014, 08:48 PM
  2. Do you have a chain tool that you like?
    By old white truck in forum Technical Help
    Replies: 4
    Last Post: 06-09-2013, 11:02 AM
  3. Tool Box
    By r80rt in forum Performance and Customization
    Replies: 10
    Last Post: 05-27-2013, 12:02 PM
  4. Tool Kit
    By scotti158 in forum General Discussion
    Replies: 6
    Last Post: 05-14-2013, 03:35 PM
  5. 2 questions, 1 tool kit...
    By eventiller in forum General Discussion
    Replies: 4
    Last Post: 07-13-2012, 04:08 PM