TW200 Forum banner
  • Hey Everyone! Enter your bike HERE to be a part of this months Bike of the Month Challenge!

carb

  1. Technical Help
    It’s a 2021 with 40 miles on it, was stored for the winter and will not run now. It starts up but dies when you use the throttle. It was only idling on choke but after cleaning the carb, and putting in a new spark plug, it runs without but still sounds terrible (like it wants to stall) then once...
  2. Technical Help
    Hello everyone! I’m new here. Here’s the story. Any help would be greatly appreciated! I recently bought a 2012 TW with only 100 miles on it. I took the carb off and had Yamaha in Houston go through it for me. After I put it back on the bike it started up great, purring beautifully. Once I would...
  3. Technical Help
    So my 2005 has 550 miles on it now, about 200 are mine. I'm in Idaho, elevation ~2,500 ft and plan to ride up to 6,000 often. When I first got it, I noticed the revs would hold at idle and it made riding pretty stressful, especially on city streets. I changed the air filter, oil, oil filter...
  4. Technical Help
    I have an '87 TW that I bought new in '88. My first bike. Glad I kept it. It fell into disrepair when my both my wife and dad had cancer. I've been a member for about a year, looking thru old posts for info on carb cleaning and tuning tips. Lot of good stuff, and many talented people who are...
  5. Technical Help
    Hi folks, New to TW200s and this forum. Recently bought a 1991 with 9800m on it, sight-unseen (long story). Turns out the carb body had a float pin post sheared off, and original replacements are $250-$300. So, I thought I'd take a risk see if I could make this work for $45...
  6. Technical Help
    I'm looking at getting a TW200 and I have an older DRZ with a terrible ethanol problem. I ride in California. The DRZ will get so crudded up that the carb has to be rebuilt. Are there newer model years of the TW200 that handle the ethanol-gas better? I see some posts on how to handle it, but...
  7. Technical Help
    Hey guys! I'm new to the forums. I picked up an '03 TDub last summer. It's got 3000 miles on it and it runs like a top. I would like to get a DG2 slip on. The installation of the actual pipe is pretty simple from what I've seen. My main issue is choosing the correct jetting. From what...
  8. Technical Help
    hi all, i've got a 2004 tw225e (japan model) which i've just bought recently from Japan. Done a couple of test rides and looked perfectly fine except for 1 thing, it was working quite lean. I came to this conclusion mainly cause : - Spark plug was on the white-ish side (quite a bit) - idle...
  9. Technical Help
    Rebuilt the carb on my 2003, full acid dip treatment, etc. I also replaced the fuel line, added the filter and did a bunch of other "non-fuel" stuff that I'll cover in a different post. Since doing so, I get no fuel going to the carb. I can fill the tube to the carb with some squeezing and...
  10. Technical Help
    I bought a nice looking TW few months ago that I knew had a carb problem. I cleaned it and it rode fine and then just got hard to start again. I have already ordered a Mikuni VM28-418 and new twister and throttle cable and eliminate the old air box. After reading through the forum I couldn't...
  11. Technical Help
    Hey everybody, I'm 19 years old and a first time TW owner. Just bought a 1994 TW200 in amazing condition with 940 miles on it. Sat for 15ish years with sparse maintenace from what I was told. When we brought it home, it would run very poorly at idle but was able to take a spin around the yard...
  12. Technical Help
    Hey guys, I have a feeling this might be a gummed up carb issue. Just wanted to hear some other opinions before I get down and dirty with the carb. My poor ol' tee dub (1995) has been under a tarp for the best part of a year last year. I have brought the old girl out so she can feel the wind...
  13. Technical Help
    Aloha TW200 Forum - Thanks in advance to anyone who dedicated time to reading this post. I really appreciate any help and love this forum! I recently purchased my second TW-200. This one is a 1987 CA model and has about 3k miles. The bike is in great shape. I was having some issues with...
  14. TW200 Classifieds
    I am thinking about totally replacing the carb on my 88 TW200. Any suggestions ? I was thinking Mikuni but I don't know which 1 to get. I can't afford alot, PLEASE HELP :rolleyes:
  15. Technical Help
    Help please I'm tearing my hair out. I'm in the UK and bought a (US Import) project 91 Tw from the internet as a non runner last year. I knew the bike had bits missing + broken but when it was delivered it was also missing the CDI and the pilot jet mounting was broken on the carb body. I...
  16. Technical Help
    The rubber diaphragm in the bottom of this pic was found mashed in, causing an air leak, letting dirt in and causing starting issues. Done by a mechanic 20 miles from my place. I've had my local new mechanic (1 mile from me) sort out big issues with my bike. I would have loved to do the carb...
  17. Technical Help
    Anyone know where I can get a good carb rebuild kit for my 96 TW it is a CA model so it has the carb can. Also does any one know the stock jetting for this model thanks.
  18. Technical Help
    Hi everyone, Thanks in advance for anyone who can help me. I am new to the TW but had bikes all my life. I just sold my DRZ 400s to get a TW and scored on a 2003 with 207 miles on it. It has sat for the last 8 years in a crate and is in great shape but needs the usual to get running. I have...
  19. Technical Help
    I peeled back a little of my cracked sleeve and looks like there's still a metal joint behind it intact.
  20. TW200 Classifieds
    Hi everyone, I bought a 1989 tw200 that didnt run. I was told it needed a small part in the carb. I bought a rebuild kit, and when I went to install it, noticed that the area where the nozzle/main jet holder screws into had a small chip in it. I installed the kit anyways, but the bike wont run...
Top