TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 13 Results
  1. Technical Help
    My new to me 2003 TW200 starts and runs well, and the engine turns off by a twist of the key. However, toggling the kill switch (right handle) does not kill the engine. With the key in place, the ignition button will turn the engine over even if the kill switch is set to not run. I disassembled...
  2. Technical Help
    Hey folks, I've limited electrical experience but I just bought a H3 Helmet Light system in hopes of better visibility/safety. However I cannot for the life of me find the corresponding wires that I can plug into the helmet ECU. Link to item and (unhelpful) installation video attached; many...
  3. Technical Help
    So I bought a 1994 tw not long ago and have been slowly fixing everything. I'm finally on to tackling the electric start as it cranks but won't ever fire it up. I started looking at the electrical components and found my battery holding full charge and some aftermarket work done by I'm guessing...
  4. General Yamaha TW200 Discussions
    TLDR under pictures... So the night started at 8pm eastern at CFA where I work. I was managing the shift and needed some extra energy, so I decided to have an energy drink, a Celcius for those curious... That one decision lead me to finally getting in bed and writing this at 3:31am...
  5. Technical Help
    EDIT: Odometer assembly was plug and play. I have aftermarket blinkers that are the culprit for the blinkers not working. That is the next problem to trouble shoot. I have a 2000 TW200 that I bought with no odometer/speedometer assembly. I thought it would be a pretty easy fix to buy a used OEM...
  6. Technical Help
    I bought a new wiring harness so i could hook up a ignition switch on a Tw i bought about almost a year ago! but i have trouble on finding which connector goes to which! i have a picture, does this look correct? On an OEM ignition cylinder the connector is red and this is the only connector...
  7. Technical Help
    I really need some help here, i bought this bike in much worse condition than it is now but im trying to learn how the wires go to this relay, i have a wiring diagram and have some idea where wires go but id really like to see how a normal running tw200 wiring to its relay looks like so i can...
  8. Technical Help
    Hey guys, fresh to the page and the TW200 Game.. Just picked up a 1992 and want to simplify it by removing everything not needed.. Started tackling the spaghetti wiring mess last night but I figured i'd hop on here and ask the pros.. Basically I want to keep the headlight/taillight (Would like...
  9. Technical Help
    Hallo fellow tdub fans, :cool: I have a noisy starter (1996 model), making a terrible grinding sound when I crank the engine. After reading a few threads on our forum it could be one (or more) of the following: 1. Poor grounding, 2. Tired battery, 3. Faulty wiring, 4. Starter clutch, 5. Starter...
  10. Technical Help
    wiring harness swap help!!! I have a 87tw200 ant the wiring harness can not be repaired ... I know the 87 & 88 harnesses are different but I was wondering if some one knows how to make it work and would share it with me. If you do can you reply or pm me please!!! (BTW I got it as a project bike...
  11. Technical Help
    Hey guys I just bought a 1993 tw200 and I am having problems somewhere in my harness I beleive. To begin with the battery is good. The harness is kind of in rough condition and I think I might have a short somewhere. I turn the key switch on and then hit the starter button and nothing happens...
1-12 of 13 Results
Top