TW200 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1
Hello again does anyone know what is the best way to remove the brass plug to be able to get to the screw? Thanks in advance
 

·
Registered
Joined
·
2,223 Posts
Yeah, take a deck screw, screw it in a few turns and use a pair of pliers to pull the screw out and the plug should come with it. Some have said that they have had to drill out the hole a little to get the screw to start.
 

·
Banned
Joined
·
10,664 Posts
Yeah, take a deck screw, screw it in a few turns and use a pair of pliers to pull the screw out and the plug should come with it. Some have said that they have had to drill out the hole a little to get the screw to start.


Any small, pointy-tip screw will do. Deck screws usually work. I've also used small wood screws.
 
1 - 4 of 4 Posts
Top