TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
In the final stages of my TW build and thought I would share. I'm waiting to install the exhaust before I start it up and start tuning it a little.

I'm open to comments, questions, and recommendations!

IMG_0084.jpg
 

·
Registered
Joined
·
1,947 Posts
I love customized, personalized, modified, hopped-up, anything that makes a motorcycle "belong" just to its owner/builder/rider!
The area beneath the seat could be tidied up a bit...that's about all that "jumps out".
How will you use the bike?

You might consider converting the painted & cad plated fasteners on the engine & chassis to bright or polished stainless steel.
~$30 for all. They come in small poly bags, each bag is labeled what it fits...easy-peazy-fun conversion.
Torque properly, always use Loctite or anti-seize compound on SS.

Chrome won't getcha home, but it will getcha laid.
Stainless Steel will do both!
And never rust, corrode or peel like chrome.
Most of my last 15 or so bikes were converted to SS.
No, I don't sell it, but I do love it!



Before:


After:


 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
@Berth I just took a quick picture once it actually looked like a bike haha.. there is a lot of tidying up I need to do still. I did convert all the engine hardware to SS, anti-seized, and torqued. Most of the other bolts I have been replacing at the local hardware store and making sure their torqued as well. I agree that the bolt kit was ezpz and fun -especially after fresh paint!
 
1 - 5 of 5 Posts
Top