[canadainshiver]

1991 tw200. When key is turned to 'on' should any lights or instrument clusters work? Or does bike need to be running?

 

[Rainman]

When key is on, headlight, front running lights (turn signals), rear tail light, speedometer bulb, and instrument cluster lights (if engaged) should come on.

 

[flingwing1969]

When key is on, headlight, front running lights (turn signals), rear tail light, speedometer bulb, and instrument cluster lights (if engaged) should come on.

Also your neutral light, if you are in neutral.

 

[FredTW200]

Can I ask about the rear turn signals / running lights?

With the switch in the on position both before I start the motor and also when the motor is running; the rear running lights/turn signals are not on.

I think they used to be. All the other running lights are on.



And when I use the turn signals they do not work at all on the front or back; it is like I am not using the turn signal switch at all.

This just started and now I cannot remember if the rear running lights would include all three lights on the rear ; tail light, left trun signal, and right turn signal.



Thanks,

Fred

 

[lizrdbrth]

Running lights are only in the front.



Tail light should be on.