TW200 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
After taking a tiny spill yesterday, I snapped off half of my brake control lever. So I started looking for an aftermarket replacement and found these:



http://www.sixsixone.com/v1-mdx.aspx



http://asvinventions.com/Unbreakable-Levers



Has anyone experimented with these? Has anyone used any other brand of "Unbreakable" contol levers on their T-Dub? Sunline only makes levers for the following Yamaha motorcycles: (What would be the best fit?)

YZ 85 (02-11)

YZ 125 (01-07)

YZ 250 (01-07)

YZ 250F (01-06)

WR 250F (01-05)

YZ 426 (01-02)

WR 426 (01-02)

YZ 450F (03-07)

WR 450F (03-05)



Thanks for your thoughts and inputs!
 

·
Registered
Joined
·
7,369 Posts
Watch out for some aftermarket dirtbike levers. They often don't have the little cam gizmo that actuates the brake light and clutch safety switches, nor do they have a means of adding a switch.



Nothing worse than buying high rent adjustable levers and finding out you've lost your brake lights.



A lot of the stock type YZ direct replacement levers will fit our perches, but again make sure they have the switch engagement cams.



A set of decent hand guards solves the broken lever problem permanently and for a lot less munny.



Just sayin'.
 

·
Registered
Joined
·
1,014 Posts
1 - 4 of 4 Posts
Top