TW200 Forum banner

Any dealer along Transamerica with good clutch service?

Jump to Latest Follow

1 - 2 of 2 Posts
docjekyll2002

·
Registered
Joined
·
648 Posts
Discussion Starter • #1 •
My local mechanic has rebuilt the carb but recommends that i also replace some clutch components. I have noticed that the clutch has been slipping this year and the TW has been ridden aggressively and has 15,000 miles. I'm set to leave NY tomorrow and want a worthy mechanic to do my clutch at least at the halfway point of the TAT.
 
docjekyll2002

·
Registered
Joined
·
648 Posts
Discussion Starter • #2 •
Nvmnd. Im partial to my mechanic and gave him the go ahead to order new clutch parts on Monday. At least the carb is fine now and i can ride a little!
 
1 - 2 of 2 Posts
Recommended Reading
Read More

  1. Carburetor- nozzle above main jet

    Technical Help
    When disassembling the carburetor, the small, short, aluminum nozzle above the main jet fell out. And I don’t know which direction it should be put back in. (When assembled, the carb/throttle needle is positioned vertically within this nozzle.) The top and bottom of the nozzle are not...

  2. Kick starter on later model TeeDub?

    Technical Help
    Has anyone installed a kickstarter on a late model TW? Have 2 2012s and would like the option. Looks to me you must replace the case cover with older model. I know my 2001 had a rubber plug you could remove and add the parts... Any guidance would be appreciated.

  3. Pilot jet #34 fuel screw starting point

    Technical Help
    Ok, so just installed a #34 pilot jet in my 16 tw 200. Reason behind it was a little run on and some lean conditions I could sense. I already opened the fuel screw from 1.5 turns out to 2.5 turns out and did see some minor improvement but not enough, so that's why the #34. Anyways, just...

  5. New to me, 1992, crooked headlight / fairing

    Technical Help
    Picked up a 1992 thats a great runner. All original. The front end looks like it had a minor collision, and the headlight / turn signals / headlight mount all seem a bit crooked. The fairing looks to be in good shape. Is there a fairing stay? Or is that all built into the headlight rim? I'm...

  6. Help with wiring!

    Technical Help
    I bought a new wiring harness so i could hook up a ignition switch on a Tw i bought about almost a year ago! but i have trouble on finding which connector goes to which! i have a picture, does this look correct? On an OEM ignition cylinder the connector is red and this is the only connector...
Read More
About this Discussion
1 Reply
1 Participant
Last post:
docjekyll2002
TW200 Forum
A forum community dedicated to Yamaha TW200 owners and enthusiasts. Come join the discussion about performance, exhaust, suspension, parts, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General Discussion Technical Help Off-Topic Performance and Customization Trails, Off-road, and Adventure Riding
Popular Communities
Community avatar for Home Entertainment
Home Entertainment
1,280,000+ members
Join
Community avatar for Mountain Bike Reviews
Mountain Bike Reviews
450,000+ members
Join
Top