I just got some Blackfoot pegs for the TW, from PCC Global Trading, I thought they were steel. Nope, they are either aluminum, or since they came from China I'm thinking pot metal, shit I'm afraid to mount them, what if they break when I'm out on a trail somewhere. I guess it's buyer beware on EBay. Watch out for a $26 rip off. I read a post on ADV riders and another owner bought some cheap Chinese pegs for his wife's bike, she dropped it the peg disintegrated, I've decided on some good IMS stainless foot pegs.
Blackfoot pegs
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Chain and sprocket dilemma?
Performance and CustomizationSo here is my problem, I have 2019 tw200 with 4000 miles on it. I put a DID o-ring chain on it 2000 miles ago and I now believe this was a fake DID chain because I have lost/cracked 2 of the rollers on the chain. I rode for awhile missing one of the rollers before I noticed it and cut out the...- 20
- 390
-
New Chinese CDI Experiment For My TW
Performance and CustomizationI've had it with the Yamaha stock CDI's. Bought a brand new one from my local Yamaha dealer 3 years ago and now after 30 000 miles it's already busted. Anything over 4000 rpm and the bike stutters, I replaced the coil and spark plug cap and everything still the same so I'm sure it is the CDI...- 24
- 752
-
Cornelis · updated
-
Cycleracks vs Manracks rear rack WIDTH comparison
Performance and CustomizationHello, hello!! I am the proud owner of an 2015 TW with 800 miles on it. I'm very excited to join the club. I have searched the forum here and the respective manufacturers websites but can't quite gauge the dimensions of the two racks comparatively. The Manracks website gives a nice topdown...- 9
- 179
-
Shinko e 700
Performance and CustomizationSaw a few posts here of people going with the 700 but no follow ups. So alas I will take my turn with the club to beat this horse. after days of review reading and video watching. I decided to replace my 460mi front tire with a shinko 700 stocker is out of round. I used the 130-80/18 size. And...- 10
- 346
-
Diy skid plate?
Performance and Customizationam making my own skid plate and I was wondering if anybody could measure the with of there ricochet off-road skid plate. the picture I have posted has two dots if you could plea measure the length between the two dots that would be great I will be using the measure meant as a reference to...- 5
- 273
-
mr sl125/tw200 · updated
Join now to ask and comment!