Hey everyone. Today I was looking at the blinkers I ordered online and found something that could be a potential problem. The stock wiring on my front blinkers is 3 individual wires while the rear blinkers are only 2. The new aftermarket blinkers I ordered are only 2 wires. Will my new blinkers be compatible with the front stock wiring? Why does the stock wiring have 3 wires in the front and only 2 in the rear? Any help would be great!
Blinkers
-
Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!
1 - 3 of 3 Posts
Joined
·
3,923 Posts
Your stock front sigs had fulltime running lights and used dual-filament bulb, hence the three wires.
You can use two-wire signals, but you won't have the running light feature. You'll need to drop one wire and use only the turn signal wire and the ground to your new bulbs.
You can use two-wire signals, but you won't have the running light feature. You'll need to drop one wire and use only the turn signal wire and the ground to your new bulbs.
1 - 3 of 3 Posts
