Carb Leaking
1 - 2 of 2 Posts
Joined
·
1,703 Posts
Yep, you've either got a float that is sticking, and or need a float valve repair kit. Read this thread and let us know how you fare. http://tw200forum.com/index.php?/topic/1870-carb-float-height/page__p__16338__fromsearch__1#entry16338
You can probably do it, but if you are a total nubie with carbs, I'd suggest a friend help or you invest $50 to have it done by a professional. IMHO. Good luck. Tom
Oh, in the meantime always turn off that petcock when you are not on your bike. When the engine is running it will probably consume enough fuel to keep up with the leak. T.
You can probably do it, but if you are a total nubie with carbs, I'd suggest a friend help or you invest $50 to have it done by a professional. IMHO. Good luck. Tom
Oh, in the meantime always turn off that petcock when you are not on your bike. When the engine is running it will probably consume enough fuel to keep up with the leak. T.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Hi New TW Owner/Bike only running on choke
Technical HelpHi, I am a new TW owner, purchased a 2018 brand new last year. When I took my bike out of winter storage, it was only running on full choke. I forgot to empty the gas from the carbs while in storage. After running Seafoam through the tank, it now runs on half choke. Will not idle without it. I...- 46
- 1K
-
Pilot Screw-New twist
Technical HelpHave been seeing several posts regarding pilot screw adjustments again and came up with an easy adjustment option. Greg Phillips extension to the screw works very well, however my fingers aren't as nimble as they had been. I experimented with a piece of speedometer cable and came up a easily...- 5
- 141
-
Senior citizen · updated
-
This gas cap is hard to find.
Technical HelpTitle says it all. I’ve been restoring an 87 tdub and the only piece of the puzzle I’m missing now is a gas cap. I really don’t want to spend 115 on a cap when I only spent 250 on the bike. Anyone know of some alternate caps? I’ve searched here but all the threads are 8+ years old and the...- 8
- 203
-
87tdubs · updated
-
Slide carb needle removal
Technical HelpOk, so I’ve been doing a little carb work on my 2000 (bigger main and pilot, new gaskets etc) so I’ve had my carb out to inspect and clean. I can’t for the life of me figure out how to remove the slide to add a couple shims to the needle. I have looked all over for instructions specific to the...- 5
- 74
-
daveinoh · updated
-
will this cam shaft fit my Tw125?
Technical HelpHi! I'm new to this forum and have just started rebuilding my tw125. Engine god a broken rockerarm, a timing chain that has fallen of the lower sprocket and it was in best case 1dl of oil in the engine. Are now rebuilding the top and need a new camshaft and is wondering if this will fit, see...- 9
- 245
-
GerhardFuglem · updated
Join now to ask and comment!