TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!
1 - 6 of 6 Posts

· Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
I had a good ride on the dub today and noticed when I down shifted full clutch in I could still feel action in the chain. When I got home I shut down the machine and shifted it into gear there is tension on the chai n with full clutch in and no resistance in nuetral. I tried adjusting the cable in and out but to no avail and the spring is properly aligned. Anyone else have similar problems my bike is low milage if it makes a differance?



Thanks

Ryan
 

· Registered
Joined
·
295 Posts
My 2010 with 14K miles is easier to push in neutral than in gear with clutch fully pulled. Was like that from day one (bought her new) and since the clutch is still not slipping with 14k miles on it, I guess it's all right.
 

· Registered
Joined
·
127 Posts
Discussion Starter · #5 ·
Well sounds like this is the nature of the beast vs. an individual problem. I can live with it but if there is a cure feel free to [email protected] Zombie the bike has less than 300miles the cable is still good, good advice though.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top