TW200 Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
3,109 Posts
Discussion Starter #1
Would like to buy some of the springs that come with the ebay footpegs. Mine broke so I ordered some rm80 pegs from ims and need one of these. It's the one on the bottom of the picture that I need.

 

·
Registered
Joined
·
106 Posts
Would like to buy some of the springs that come with the ebay footpegs. Mine broke so I ordered some rm80 pegs from ims and need one of these. It's the one on the bottom of the picture that I need.





http://www.ebay.com/itm/BLACK-FOOT-PEGS-YAMAHA-PW-50-80-TW200-PW50-PW80-50-FP02-/360232669042?pt=Motorcycles_Parts_Accessories&hash=item53df8a4f72

I bought some of those pegs and broke the spring assembling them... Anyways , they sent me out a pair of new springs , so they have them... They are in Cucamonga and they have a ph # ,, listed in the Ebay listing.. l
 

·
Registered
Joined
·
3,109 Posts
Discussion Starter #3
I didnt see a phone number but I will keep that in mind. I'm really just hoping that if someone broke their pegs the springs may just be lying around w/o a purpose.
 

·
Registered
Joined
·
106 Posts
I didnt see a phone number but I will keep that in mind. I'm really just hoping that if someone broke their pegs the springs may just be lying around w/o a purpose.
Sorry about the phone # ...its not there anymore.. I think e-bay cracked down on them .. I looked in my ebay messages and couldnt find the # either . Good luck with your search.. E



 

·
Registered
Joined
·
3,350 Posts

·
Registered
Joined
·
3,109 Posts
Discussion Starter #8
I finally got in touch with them today. $7 shipped for a pair of the springs.
 

·
Registered
Joined
·
3,109 Posts
Discussion Starter #9
Thanks guys. I took care of it. Managed to cut and rebend the spring I had to fit. Gonna hit the trails friday!
 

·
Registered
Joined
·
1,393 Posts
You have any advice for installation of pegs using this type of spring, I'm stuck...
I got a pair of the pegs that take those springs by mistake and couldn't figure them out either. I meant to order the ones that use the stock pins and springs, and have ordered them since. Even those require either drilling a hole in the proper place in the peg or snipping the spring end. I drilled the hole.



PalmStateCrawler, or anyone else......I will ship an unused set of pegs and springs to anyone that wants them for free plus shipping cost. I'm gonna keep the pins which are the same size as stock.



 
1 - 11 of 11 Posts
Top