TW200 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
So while installing the quiet core I happened to find what I thought were two bolts backing out of my exhaust. The two lower ones for the end cap. I grabbed the right size Allen but they wouldn’t tighten. Just free spin. I’ve never pulled the end cap and the muffler is less than 6months old. I wound up pulling all 6 of the bolts and 3 of the 6 came out with no pressure and threads on the bolts. Probably stopped from factory.
My question is....do you think DG will send me another end cap? Or make me send the whole system back for exchange? I’d rather not put my stock system back on. And I did copper plate the bars the bolts pass through while I hade them off.
 

·
Registered
Joined
·
643 Posts
Might get some repair recommendations if you post up some photos for assessment. As for returning it to DG, you'd need to talk to them and find out the repair costs and warranty.
 

·
Registered
Joined
·
33 Posts
Discussion Starter #3
Update: procycle responded 3 days later and told me to contact DG directly. Emailed DG. Got a response within an hour and a new end cap is on its way.
 
1 - 3 of 3 Posts
Top