TW200 Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
200 Posts
Home Depot and Loews (where I am) didn't have the right size. Fastenall and Ace Hardware are the places to go! You can also replace the screws that hold your diaphragm too!
 

·
Registered
Joined
·
8,300 Posts
I just raised my front fender an inch with nice aluminum spacers. The cap nuts on the fender bracket are welded on so I needed a full one inch longer 6MM bolts. I also wanted them to be stainless and hex head Allen that take a 5MM wrench. After lots of searching I found a place and had to buy a box of 100 6MM X 45MM bolts in SS. Not cheap but got the job done. The fender looks pretty nice up an inch higher.

Bolts cost me .50 cents each so $2 for 4 of them. If anyone needs a set of 4 then let me know and I'll find out how ridiculous the postage will be.

GaryL
 
1 - 10 of 10 Posts
Top