Yes, several are available in different lengths in both steel and aluminum. Check similar threads on bottom left of page for models, vendors and specs. I favor steel in that it can be bent and forth through many cycles unlike aluminum alloys before fatigue fracture failure.
Hello everyone, my name is Jesse, in Tucson AZ, and I just wanted to document/photodocument the project I just completed after 2.5-3 months. First off, I just wanted to say thanks to the many contributors on this awesome forum that helped guide me as I spent many hours reading old posts to be...
Is there a website that has the original decal designs for reproduction?
I bought a 1996 accident bike in need of much tlc
Johannesburg, South Africa
Sent from my iPhone using Tapatalk
I've been looking for quite a while and looked at quite a few posts on this forum about this topic but haven't seen a solid answer. Can anyone tell me which of the ims brand folding shifters most closely matches the bend and length of the stock shift lever? I like ims brand shifters and have had...
Looking at changing out my stock bars for Pro Tapers (or Tusk Chubs Big Bars), but can't figure out which model is closest to stock.
I plan on using 1 1/8" style. Will use ROX risers to convert from 7/8" to 1 1/8". Don't want to extend any cables.
Tusk Chubs chart below.
I love my new to me 2014 TW200! It had low kilometers and was in mint condition, and it's my first bike which is great to learn on.
While it seams most people here modify the tdub for more utility purposes, I thought I'd share my first customization geared a little more towards the street...