Joined
·
243 Posts
Tec Specs:
All threaded holes are 1/4 npt.
Adaptor, Cooler, and 49 state bracket are made from 6061 aluminum.
All fittings are 1/4 inch brass hose barbs. These are standard fittings that you can find any where if you need to.
Hose clamps are stainless steel.
Hose is the same stuff Russ wuz using. So you know its good. (That high rent stuff.) Good year took their name off of it. (Continental Contitech InstaGrip is what it is. Took me forever to find it)
Pretty much every thing you could possibly ask is answered in this thread. I suggest anyone that buys any part or kit read this thread before you purchase.
There is a ton of great information, and ideas for people who like to tinker, on this thread.
TW200 Engine Oil Cooler
These are made to be as tough, rugged, and functional as the mighty TW 200. If you manage to break the cooler or adapter, (I want pictures of the bike and your hospital bill.) I will replace it.
Pricing:
All prices include shipping in the lower 49 states. If you are from outside the U.S.A. we will have to work that out.
Adaptor only (adapter no fittings) $65.00
Cooler only (cooler no fittings) $65.00
Complete kit (adaptor, cooler, fittings, clamps, 30 inches of hose, 49 state bracket) $170.00
California Kit (same as the complete kit no 49 sate bracket) $155.00
49 State bracket (with Stainless Steel 1/4-20 bolts and washers) $25.00
Hose (the high rent stuff) $4.00 per foot plus shipping (because I don't know how much you need.)
Hose barbs and clamps are standard that you can find at any hardware store. It does not make sense for me to sell them to to you when you can save shipping and handing and pick them up local.
How to buy:
Send me an e-mail with your name, forum name, full address, what and how many you would like to buy.
My e-mail: [email protected]
Thank you,
Ken
P.S. Now we can all stay cool.
All threaded holes are 1/4 npt.
Adaptor, Cooler, and 49 state bracket are made from 6061 aluminum.
All fittings are 1/4 inch brass hose barbs. These are standard fittings that you can find any where if you need to.
Hose clamps are stainless steel.
Hose is the same stuff Russ wuz using. So you know its good. (That high rent stuff.) Good year took their name off of it. (Continental Contitech InstaGrip is what it is. Took me forever to find it)
Pretty much every thing you could possibly ask is answered in this thread. I suggest anyone that buys any part or kit read this thread before you purchase.
There is a ton of great information, and ideas for people who like to tinker, on this thread.
TW200 Engine Oil Cooler
These are made to be as tough, rugged, and functional as the mighty TW 200. If you manage to break the cooler or adapter, (I want pictures of the bike and your hospital bill.) I will replace it.
Pricing:
All prices include shipping in the lower 49 states. If you are from outside the U.S.A. we will have to work that out.
Adaptor only (adapter no fittings) $65.00
Cooler only (cooler no fittings) $65.00
Complete kit (adaptor, cooler, fittings, clamps, 30 inches of hose, 49 state bracket) $170.00
California Kit (same as the complete kit no 49 sate bracket) $155.00
49 State bracket (with Stainless Steel 1/4-20 bolts and washers) $25.00
Hose (the high rent stuff) $4.00 per foot plus shipping (because I don't know how much you need.)
Hose barbs and clamps are standard that you can find at any hardware store. It does not make sense for me to sell them to to you when you can save shipping and handing and pick them up local.
How to buy:
Send me an e-mail with your name, forum name, full address, what and how many you would like to buy.
My e-mail: [email protected]
Thank you,
Ken
P.S. Now we can all stay cool.
