TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5,941 Posts
Sorry, but I don't have any pics that would help.

I swapped the parts from a complete, running 2003 TW onto my son's 1987 TW. So I used the entire front brake lever/master cylinder including the attached brake light cable assembly. I then used the 1987 brake lever/brake light cable assembly on the 2003 for a fat front wheel conversion with a drum brake. I do not remember having any issues with the wiring, so my guess is that the 2003 brake light cable was able to plug directly into the 1987's wiring harness, and vice versa.

I hope this helps,

Brian
 
1 - 5 of 5 Posts
Top