TW200 Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hi I am a new user and I got a 2003 tw200 with 2000 miles on it. It is stock other than the racks and a very clean bike. I have one problem though, the headlight shroud comes loose. The screw on the bottom is fine but where it hooks to the rubber peices on either side, itwont stay on. Any help would be greatly appreciated. Thanks,
Parker
 

·
Registered
Joined
·
324 Posts
The above responses are correct. Just take out the screw at the bottom and the shroud "tabs" should be right under the rubber grommets. If not carefully bend the mount back. They are pretty sturdy but can get knocked out of alignment during a fall. The shroud will not fall off but it won't stay connected with the vibration during riding. Mine got bent from another motorcycle falling partially on it but I didn't notice the issue until I saw that it wasn't in the rubber mounts.
 
1 - 7 of 7 Posts
Top