TW200 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
Hey guys bike runs great, starts up without the choke. So what do you think about my plug?

Location Jacksonville Fl

130 main

5 shims (real ones)





 

·
Registered
Joined
·
3,109 Posts
If you want to get a more accurate look you need to put in a new plug, run in it for about two minutes at wot and then pull it. This plug is showing mixed results. The different ranges- pilot, needle and main will show different results so with the change you made a wot test will tell you what you want to know.
 

·
Registered
Joined
·
123 Posts
The metal probe above the electrode indicates that it is running lean still, WHITE AND YELLOWISH IS BAD. Yours show both white and black portions. Your photos are hard to see and dont show the electrode either, It should look like a tanish color! But PALMSTATECRAWLER is right on when he says a new plug is best to determine an accurate reading.
 
1 - 3 of 3 Posts
Top