TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
220 Posts
Discussion Starter #1
Wondering if anyone else has experienced this. Bike idles correctly when i start it. After i ride and come to a stop idle is really high unless i crack the throttle, then it goes back to normal. Float height is correct. Enricher circut parts are new. old style carb 125 main 42 pilot 2.5 out and idle air 3 out. Plug light brown. Bike runs great at all rpm, slight high rpm miss at wot
 

·
Registered
Joined
·
2,126 Posts
Throttle cable hanging up/routed wrong or a little too tight?
 

·
Registered
Joined
·
2,126 Posts
dirty carb butterfly valve? Have throttle on full. a little carb spray and lightly clean valve and bore with old toothbrush.
 

·
Registered
Joined
·
220 Posts
Discussion Starter #4
new cable, no hang ups, Fully cleaned, dissasembled taken apart and soaked a month ago. What do you mean butterfly valve
 

·
Registered
Joined
·
220 Posts
Discussion Starter #5
if you look at the throttle it is sitting right on the idle screw. so the throttle is all the way off
 
1 - 5 of 5 Posts
Top