TW200 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
976 Posts
Wow, that little bike looks like an absolute blast! Thanks for posting dubyaohohdee.

I read the reddit thread linked above, seems a lot of those posters missed the point. $50 for the plans doesn't really seem to steep, although I'm sure I don't quite have the technical wherewithal to build something like that from schematics alone.

Calling all T-dubbers with a decent workshop and an extra $50!
 

·
Registered
Joined
·
254 Posts
Inflatable rokon

That's pretty slick....I've seen a lotta guys throw their bike down a slope,but never pull one up!:D:D I'd like to know more about the drive mech. and powerplant......
 

·
Registered
Joined
·
254 Posts
Here's the drive system:




It would be wise to add a 4th (flange) bearing on the(inside) fork leg to fully locate the U/V shaft and not load the U/V joint with side forces that would accelerate it's wear. An alternative to chain drive could be using 'Gilmer' type belts.His design requires very few pieces with a curvature;so fixturing for welding could be as simple as wooden jigs. Well worth the $50 for the plans,I think.
 
1 - 8 of 8 Posts
Top