TW200 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1

·
Registered
Joined
·
1,442 Posts

·
Registered
Joined
·
1,726 Posts
Check out Emgo Enduro Mirror at Gnarly parts in Chilliwack, BC.
I have this one on my DT. It works well and is universal; left or right. I know they ship, not sure as to the cost as they are a nice VStrom ride from my place.:D
 

·
Registered
Joined
·
1,442 Posts
Did you have to purchase the bracket adapters or do the Ken Sean mirrors screw right into the stock mirror bracket?
No bracket required. The 10mm screws right in.
 

·
Registered
Joined
·
297 Posts
I purchased a couple nice mirrors that require Allen head cap screws to attach them. The thread size on the TW is M10 fine thread. The mirrors came with the required cap screws in right hand fine thread, but on the TW the right side requires a left hand thread. I searched everywhere I could trying to find a M10 x 20 left hand thread cap screw with no results. I finally found some on eBay and ordered them from China, but on the EBay ad it didn’t mention thread pitch. I received coarse thread. I’m still looking, they’re nice mirrors so I’m just using the one on the left side for the time being.
It’s really tough finding left hand thread cap screws.
 

·
Super Moderator
Joined
·
18,052 Posts
1 - 8 of 8 Posts
Top