TW200 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
412 Posts
Discussion Starter #1 (Edited)
During the strip and rebuild of my 125/200 conversion I've managed to lose the above bolt. I know it's an M12 of 25~30mm length but could somebody kindly confirm the pitch for me please? Is it a standard 1.5 pitch or a fine pitch?

Edit: I'm looking to replace it with an A2 stainless bolt, would this be suitable or should it be a high tensile bolt

Many thanks,
Mick
 

·
Registered
Joined
·
13,810 Posts
During the strip and rebuild of my 125/200 conversion I've managed to lose the above bolt. I know it's an M12 of 25~30mm length but could somebody kindly confirm the pitch for me please? Is it a standard 1.5 pitch or a fine pitch?

Edit: I'm looking to replace it with an A2 stainless bolt, would this be suitable or should it be a high tensile bolt

Many thanks,
Mick
In the manual, it says the size is M12x1.25. Does this sound like what you're looking for?
 

·
Registered
Joined
·
4,172 Posts
I ask the same questions when I first started working on TWs. Admiral nailed it!!!

Here’s a printable link, Service Manual TW200E

[video]http://www.tw-parts.com/macbig2k1/doc/tw200-2000_main_manual.pdf[/video]
 

·
Registered
Joined
·
13,810 Posts
I ask the same questions when I first started working on TWs. Admiral nailed it!!!

Here’s a printable link, Service Manual TW200E

[video]http://www.tw-parts.com/macbig2k1/doc/tw200-2000_main_manual.pdf[/video]
For some reason, I only look up the sizes or what I think are the sizes to be more accurate, when it's for someone else. When it's for me I stare at the bolt bin wondering why I didn't look up the size bolt I need out of the manual BEFORE I drove into the store. :p
 
1 - 6 of 6 Posts
Top