TW200 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
814 Posts
Discussion Starter #1
While doing repairs to mine, I noticed that at the top of the cylinder head, there is a bracket to affix the engine to the frame.

Problem is...there are no bolts in there at this time. There is another frame mount near the front of the engine and that one had bolts, but not on this one.



Should there be? Anybody else notice this?
 

·
Registered
Joined
·
231 Posts
i only see one bracket at the top of the cylinder going to the frame(it is bolted up). at the front i only see the thru-bolt at the base of the engine.
 

·
Registered
Joined
·
814 Posts
Discussion Starter #3
i only see one bracket at the top of the cylinder going to the frame(it is bolted up). at the front i only see the thru-bolt at the base of the engine.
Exactly...mine has NO BOLTS to secure the top of the engine to the frame!

Parts diagram shows one...Guess I should remedy that!
 

·
Registered
Joined
·
231 Posts
yeahhhh i would get on that asap. seems kinda important. if yo ucant find specs on the bolt lemme know and i'll pull one to thread match.
 
1 - 5 of 5 Posts
Top