TW200 Forum banner
  • Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!

New exhaust Newb question

3617 Views 16 Replies 6 Participants Last post by  chevyy1212
Ok sooooo pretty much will I need to rejet my carb or do anything to it for that matter if I just end up cutting the stock pipe down and putting this on. Its a simple clean way to get the exhaust where I want it. Im still not to sure what rejeting does or what jets are good for these bikes anyway but thats another day.

So long question short I will I need to touch the carb after putting this on to keep it running right.

Supertrapp 3 in. pipe (1 1/4 inlet) and core ~ 3171250
1 - 1 of 17 Posts
When you modify one 'thang' it usually affects some other 'thang'. Some effects can be predictable, some not.

There is not really a definitive way to say do A, then adjust B, and then you are all set. At most you could get an "I did A, I adjusted B, and my bike runs/performs for me, per my riding conditions, etc."

You will just have to figure out what works best for you. Please keep us posted on what you do and provide lots of pictures. I enjoy seeing this stuff.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.