Good to see your mod, clean setup. When we all going on a ride ???? You are the Best TW Desert magnet/Director/Host/Ride Engineer/Trail Buster. Build it and they will come.....I've seen it.
Ronnydog
Ronnydog
-
Hey Everyone! Vote for the Site Favourite BOTM winner for the year of 2022 HERE!
New Trail Tech Vapor install for Muley
6
About a month ago I crashed Muley trying to ascend a dry wash... the way she fell she landed on the left front part of the bike and it took out my stock speedo. (I bailed in mid-air and landed in a fetal position on the ground. Thank God for helmets! Slight bruising on my left side...)
Well, that caused me to want to "re-engineer" my instrumentation area. So here is what I did. I created a new shelf that would hold a new Trail Tech Vapor with the "dashboard" bezel. I put this on the left side. Next to it I have a blue LED lighted switch that turns on / off my high beams along with a red LED indicator that my high beam switch is on. Next to this I have a red LED switch that turns on power to my (now) hard wired Garmin GPS (60csx and 205w) and a 12vdc lighter socket.
I'm quite pleased with the results and I must say that the Trail Tech Vapor is really cool. I love all the data points that it collects and displays.
Here are some pictures:
![]()
![]()
![]()
![]()
![]()
![]()
Well, that caused me to want to "re-engineer" my instrumentation area. So here is what I did. I created a new shelf that would hold a new Trail Tech Vapor with the "dashboard" bezel. I put this on the left side. Next to it I have a blue LED lighted switch that turns on / off my high beams along with a red LED indicator that my high beam switch is on. Next to this I have a red LED switch that turns on power to my (now) hard wired Garmin GPS (60csx and 205w) and a 12vdc lighter socket.
I'm quite pleased with the results and I must say that the Trail Tech Vapor is really cool. I love all the data points that it collects and displays.
Here are some pictures:
1 - 1 of 12 Posts
1 - 1 of 12 Posts
