[TK200]

Anyone ever added a nitrous setup to their T-dub, found one on ebay that looks interesting http://cgi.ebay.com/ebaymotors/ws/e...akeTrack=true&ssPageName=VIP:watchlink:top:en

 

[bikerjosh]

Anyone ever added a nitrous setup to their T-dub, found one on ebay that looks interesting http://cgi.ebay.com/ebaymotors/ws/e...akeTrack=true&ssPageName=VIP:watchlink:top:en

I really don't even know how to respond to this?

At $40, you should give it a shot (no pun intended; after all tw motors aren't that tough to rebuild.

 

[disenfranchised]

I haven't tried this on my TW... but I did do it a couple years ago with the exact same kit on a Honda Ruckus. Ziptie the bottle/trigger on the left grip, run a hose down, and jam it into the air intake. It works great as long as you don't spray too much, but its so hilarious on a small engine that its hard not to give it everything you can

So yeah, it backfired and bent the con rod and destroyed the cylinder, but I hit 70+ on a Ruckus. (If you think the TW is screaming going that fast...)



Do it, post video.

 

[qwerty]

Nitrous adds oxygen, this kit adds no fuel. The result is an extremely lean fuel mixture, burned valves, and holed pistons.



I would not use this kit for anything not fuel injected that could add more fuel automatically.

 

[disenfranchised]

This is true, I should mention I had a bigger jet on my scoot.

 

[disenfranchised]

This is true, I should mention I had a bigger jet on my scoot.